Maytag MWF4200AWS Technical Information download pdf (Page 75)

5-25

5.4.8 MWF 4300 AWS Controller (Advanced Controller)

• Use with waters having turbidity up to 5.0NTU, usually rural water installations.

• Has two output terminals. Controls both the automated drain solenoid valve and the automated

inlet solenoid valve.

5.4.8.1 Attaching Controller to Wall

Step 1 – Determine the location where the

controller will be mounted. Ensure that the

location will allow for the controller to be plugged

in to the power outlet and connected to the

automatic inlet and drain valves.

Step 2 – Using a level, draw a line on the wall at

the location where the controller is to be installed.

It is strongly recommended that the controller be placed in a location that is inaccessible to

young children.

Step 3 – Use a measuring tape to mark the

location where the two holes are to be drilled

(ensuring the two holes are 5 ½” apart). Use a

3/16” drill bit to drill the holes

Step 4 – Install the plugs and screws, leaving ¼”

protruding to hang the controller. Slip the

controller over the screws and slide it to the right to

secure in position.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 134 135

No comments

Maytag MWF4200AWS Technical Information Page 75