Maytag MWF4200AWS Technical Information download pdf (Page 118)

7-1

7 Frequently Asked Questions

7.1 What does the MAYTAG Whole Home Water Filtration System do?

The System has been specifically designed to physically block and remove bacteria, viruses and parasites

including cryptosporidium and giardia (beaver fever) and eliminates cloudiness from your drinking water.

The carbon prefilter removes chlorine to improve taste and odours on municipal water.

The System effectively filters all municipal, well and lake water.

7.2 Where is the MAYTAG Whole Home Water Filtration System installed?

The System is installed at the point where water enters the house to provide filtered water from every tap.

Water is available on demand with no wasted water during filtration.

7.3 Does the MAYTAG Whole Home Water Filtration System require

electricity?

Filtration is accomplished with existing water pressure and no electricity is required to filter your water.

Unless required for pump operation, the System will continue to filter water during a power failure.

Electrical power is required to operate the solenoid valves that initiate flushing of the System. If electrical

power is not available, the System will not conduct automatic flushing. Controller settings are saved by

battery backup power.

7.4 Does the MAYTAG Whole Home Water Filtration System affect the

water pressure?

There is minimal effect on your existing water pressure. Under most circumstances, no change in water

pressure will be noticed after the installation of a new System. There is no need for an additional water

pump if the existing water pressure meets the minimum System requirements.

Under normal operation in cloudy water the System may foul more quickly than in cleaner water, may

require more frequent cleanings and may require alternate controller settings.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 134 135

No comments

Maytag MWF4200AWS Technical Information Page 118