Maytag MWF4200AWS Technical Information download pdf (Page 11)

2-3

The MAYTAG Whole Home Water Filtration System must be;

• tested annually using the integrity test.

• operated with either a Carbon or Stainless Steel Prefilter.

Failure to do so may cause the System to become damaged, which may lead to personal injury, and/or

physical damage and will void any warranty.

If the MAYTAG Whole Home Water Filtration System is installed in a System that has run untreated

well or surface waters, all household water pipes must be sanitized to ensure water quality.

2.6 Emergency Bypass Safety (if installed)

Metal water piping systems must be electrically grounded and have electrical continuity throughout as

per the local codes. In the absence of a metal bypass valve and piping, electrical bonding between metal

inlet and outlet piping on the MAYTAG Whole Home Water Filtration System must be provided as per

the local codes.

Bypassing the MAYTAG Whole Home Water Filtration System will result in unfiltered water entering

the household distribution system. This water may be biologically unsafe and drinking this water could

result in illness or death. Exercise caution in bypassing the System. Do not drink the water while the

System is in bypass mode.

If the System has been operated in by-pass mode and if the water is being drawn from a well or surface

water source, the household distribution system should be re-disinfected once returned to filtration

mode.

If the System is in by-pass mode, the controller must be unplugged. Failure to do so may cause

System to dry and become damaged, which may lead to personal injury, and/or physical damage and will

void any warranty.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 134 135

No comments

Maytag MWF4200AWS Technical Information Page 11