8-2
“Area” Problem/Situation Correction/Action
Base
Controller
Drain does not function. Push “Next” once. The MANUAL indicator will
flash. Press and hold the “manual flush” button for
10 seconds. The “Manual” indicator will appear on
the screen. This will open the drain valve for 5
minutes. To toggle the valve closed at any time
press the “manual flush” button once.
If the valve still does not open, it is possible the
valve will need to be replaced.
Advanced
Controller
Drain does not function. Ensure Controller is set to be “on” (see sections
5.4.8.3). Press and hold the “flush” button for 10
seconds until the FLUSH LED illuminates then let
go. This will open the drain valve for 5 minutes.
To toggle the valve closed at any time press the
“manual flush” button once.
If the valve still does not open, it is possible the
valve will need to be replaced.
Integrity
Tester
Refer to section 5.5.4
Comments to this Manuals