Maytag 1800 W - 2005 Specifications download pdf (Page 20)

Disassembly Procedures

To avoid risk of electrical shock, personal injury or

death; disconnect power to unit before servicing.

8. Remove screws securing element mounting brackets

to main top assembly (select models).

9. Gently remove elements from mounting brackets to

prevent damage to glass top (select models).

10.Reverse procedure to reinstall maintop assembly.

Control Panel

1. Remove power from unit.

2. Open oven door and remove screws securing control

panel.

3. Remove screws located on the right and left sides of

the control panel.

4. Grasp control panel on the far left and right sides and

gently pull the control panel out and down.

NOTE: Gently pull control panel out and down.

5. Remove infinite switch control knobs, infinite

switches, indicator lights, rocker switches, and

electronic control/clock (as necessary) and transfer to

the new control panel.

6. Reverse procedure to reinstall control panel.

Electronic Control

1. Remove control panel, see “Control Panel”

procedure, steps 1 through 4.

2. Remove screws securing electronic control bracket to

control panel.

3. Label and disconnect terminal wiring from electronic

control.

4. Reverse procedure to reinstall electronic control.

Control

Panel

Electronic

Control

Infinite Switch

1. Remove control panel, see "Control Panel" procedure

for removal.

2. Label and disconnect wire terminals from infinite

switch.

3. Remove knob on infinite switch being replaced.

4. Remove screws in front securing infinite switch to

control panel.

5. Reverse procedure to reinstall infinite switch.

Removing and Replacing Range

1. Remove power from unit.

2. Disconnect downdraft blower motor and remove flex

ducting to the blower and range (select models).

NOTE: To avoid countertop damage, do not move

range forward until range has been raised

enough to clear all cabinetry.

3. Pull the range forward out of the cabinet opening.

4. Disconnect or unplug the power cord leading from

unit to fuse box or junction box depending on unit.

5. Replace the oven using the installation instructions

and anti-tip bracket(s).

Cartridge Assembly (Select Models)

Cooktop cartridges can be installed on either side of the

range cooktop.

1. Remove power from unit.

2. Lift up on the tab (located on the cartridge) until top of

cartridge clears the opening on the range by 2 inches.

NOTE: Lifting the cartridge too high while still engaged

in the receptacle could damage the terminal

plug.

3. Hold cartridge by the sides and slide away from

terminal receptacle.

4. Lift cartridge out when fully unplugged.

Install cartrid

es here

Maintop Assembly

1. Remove power from unit.

2. Remove range from installation position, see

“Removing and Replacing Range” procedure.

3. Remove air grill, filter, grill grates, aeration pan and

cartridges (select models).

4. Remove screws from plenum area at front of opening.

5. Open oven door and remove screws securing

maintop to oven chassis, located on the bottom of

control panel and along the outside edges of the

maintop.

6. Remove cartridge receptacles and grill pans (select

models).

7. Label and disconnect wiring to elements (select

models).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 54 55

Comments to this Manuals

No comments

Maytag 1800 W - 2005 Specifications Page 20

Comments to this Manuals

Related products and manuals for Microwaves Maytag 1800 W - 2005