Maytag 1800 W - 2005 Specifications download pdf (Page 32)

Installation Instructions (Models JES9750A**, JES9800A**, JES9860A**)

IMPORTANT

PLEASE KEEP FOR THE USE OF THE L OCAL ELECTRICAL INSPEC TOR.

FIGURE 1

NOTE:

Figure may not be representative of actual unit.

The 30 inches (76.2 cm) minimum clearance between the

top of the cooking surface and the bottom of an

unprotected wood or metal cabinet can be reduced to 24

inches (61 cm) minimum when bottom of wood or metal

cabinet is protected by not less than 1/4-inch (6.4 mm)

thick flame-retardant millboard covered with not less than

No. 28 MSG sheet steel, 0.015-inch (0.381 mm) thick

stainless steel, 0.024-inch (0.610 mm) thick aluminum, or

0.020-inch (0.508 mm) thick copper.

To eliminate the risk of burns or fire by reaching over

heated surface units, cabinet storage space located

above the surface units should be avoided. If cabinet

storage is to be provided, the risk can be reduced by

installing a range hood that projects horizontally a

minimum of 5 inches (13 cm) beyond the bottom of the

cabinets.

FIGURE 1

1 COMBUSTIBLE BACK WALL....

2COMBUSTIBLESIDEWALL....

3 COMBUSTIBLE WALL CABINET....

DIMENSION “A” IS TO BE A MINIMUM OF 3 INCHES (7.5

CM).

A SLIDE-IN RANGE, IF EQUIPPED WITH OPTIONAL

BACKGUARD KIT, MAY BE INSTALLED ZERO INCHES

FROM COMBUSTIBLE WALL 1 (SEE FIGURE 1).

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 54 55

No comments

Maytag 1800 W - 2005 Specifications Page 32