Maytag 1800 W - 2005 Specifications download pdf (Page 21)

To avoid risk of electrical shock, personal injury or

death; disconnect power to unit before servicing.

Disassembly Procedures

Transformer

1. Remove power from unit.

2. Remove back panel, see "Back Panel" procedure.

3. Label and disconnect wire terminals from cooling fan.

4. Remove screws securing fan to range chassis.

5. Reverse procedure to reinstall cooling fan.

Bake Element

1. Remove power from unit.

2. Open oven door and remove rack(s).

3. Remove screws securing bake element to rear of

cavity wall.

4. Pull element forward to allow disconnection of

terminals on each element leg.

5. Reverse procedure to reinstall bake element.

Broil Element

1. Remove power from unit.

2. Remove screws securing broil element to top and

rear of oven cavity.

3. Pull broil element forward to allow disconnection of

terminals on each element leg.

4. Reverse procedure to reinstall broil element.

Downdraft Blower Motor (Select Models)

1. Remove power from unit.

2. Remove bottom access panel, see "Bottom Access

Panel" procedure.

3. Disconnect ducting allow for downdraft blower motor

removal.

4. Label and disconnect electrical connections.

5. Remove screws securing motor assembly.

6. Reverse procedure to reinstall downdraft blower

motor (select models).

Downdraft

blower motor

assembly

Bottom Access Panel

1. Grasp top of bottom access panel and gently pull

down and out.

2. Reverse procedure to reinstall bottom access panel.

Indicator Lights

1. Remove control panel, see "Control Panel" procedure

for removal.

2. Label and disconnect wires from indicator light.

3. Squeeze the two tabs on the indicator light body and

gently pull to release from control panel.

4. Reverse procedure to reinstall indicator light.

Oven Sensor

Meat

Probe

Broil Element

Bake

Element

Cooling

Fan

Transformer

Meat Probe Receptacle (Select Models)

1. Turn power off.

2. Remove range from installation position, see

“Removing and Replacing Range” procedure.

3. Remove main top, see "Main Top" procedure for

removal.

4. Remove nut securing meat probe receptacle to cavity.

5. Reverse procedure to reinstall meat probe receptacle.

Back Panel

1. Remove power from unit.

2. Remove range from installation position, see

“Removing and Replacing Range” procedure.

3. Remove screws securing upper back panel to unit.

4. Remove screws securing outside edges of the back

panel to unit chassis.

5. Reverse procedure to reinstall back panel.

Cooling Fan

1. Remove power from unit.

2. Remove back panel, see "Back Panel" procedure.

3. Label and disconnect wire terminals from cooling fan.

4. Remove screws securing fan to range chassis.

5. Reverse procedure to reinstall cooling fan.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 54 55

Comments to this Manuals

No comments

Maytag 1800 W - 2005 Specifications Page 21

Comments to this Manuals

Related products and manuals for Microwaves Maytag 1800 W - 2005