Maytag 1800 W - 2005 Specifications download pdf (Page 15)

Testing Procedures

!

WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to oven before servicing, unless

testing requires power.

©2005 Maytag Services 16025927 15

Oven Control Testing Procedures

Changing factory set default options: 1. Press

Setup Options

and the desired pad simultaneously (see table).

2. Press

Autoset

to change the option.

3. Press any pad except

Cancel

to accept the change.

4. Press

Cancel

to cancel the operation.

Control Component Test Procedure Results

EOC II Oven temperature

adjustment

Press

Bake

pad and enter 550° F (288° C). Press

and hold

Bake

pad until TEMP ADJ displays.

Press

Autoset

pad to adjust oven in 5° F (-15° C)

increments, from -35° F (-37° C) to 35° F (2° C).

While increasing or decreasing oven

temperature, this does not affect self-

cleaning temperature.

EOC II End-of-Timer

Reminder beeps

Press

Setup Options

and the applicable timer

pad (

Timer 1

or

Timer 2

) simultaneously.

Selects the number of beeps emitted

when a timed bake cycle ends.

EOC II Control Lock Press

Setup Options

and the

Control Lock

pad

(also the

1

pad) simultaneously.

Press

Autoset

to select option (enable

or disable). The timer, clock and oven

light are operational.

EOC II Twelve Hour off/

Sabbath mode

Press

Setup Options

and the

12 Hour Off

pad

(also the

2

pad) simultaneously.

Disables the normal 12-hour shutoff,

allowing the oven to operate indefinitely.

EOC II Sound Level

(Beeper Volume)

Press

Setup Options

and the

Sound Level

pad

(also the

3

pad) simultaneously.

Press

Autoset

to select setting (I lowest

through IIIIIIII 8 highest).

EOC II 24-Hour Clock Press

Setup Options

and the

12/24 Hour Clock

pad (also the

4

pad) simultaneously.

Press

Autoset

to select option (12-hour

time or 24-hour time).

EOC II Scroll Speed Press

Setup Options

and the

Scroll Speed

pad

(also the

5

pad) simultaneously.

Press

Autoset

to set speed of displayed

messages (slow, medium, fast).

EOC II End-of-Cook-Time

Signal

Press

Setup Options

and

Cook Time Beeps

pads (also the

6

pad) simultaneously.

Press

Autoset

to set the number of

beeps emitted at the end of a "clock-

controlled" cook cycle.

EOC II Temperature Display Press

Setup Options

and the

Temp C/F

pad

(also the

7

pad) simultaneously.

Press

Autoset

to select option

(°F or °C).

EOC II Language Display Press

Setup Options

and the

Language

pad

(also the

8

pad) simultaneously.

Press

Autoset

to select option

(English, French or Spanish).

EOC II Factory Default Press

Setup Options

and the

Default

pad (also

the

9

pad) simultaneously.

Press

Autoset

to reset clock to factory

settings.

EOC II Clock Display Press

Setup Options

and the

Display On/Off

pad

(also the

Clock

pad) simultaneously.

Press

Autoset

to select clock display (on

or off).

EOC II Test Access Press and hold

Cancel

and

Broil

pads for 3

seconds at power up or within 5 minutes of power

up mode. See "Quick Test Mode."

Allows access to each function for testing

purposes.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 54 55

Comments to this Manuals

No comments