Maytag 1800 W - 2005 Specifications Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 55
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
Troubleshooting Procedures
!
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect power to oven before servicing, unless
testing requires power.
10 16025927
©2005 Maytag Services
Troubleshooting Chart
Problem Possible Cause Correction
No bake element operation
Open bake element ....................................
Loose wire connection or broken wire........
Open bake relay .........................................
Check element for continuity,
replace if failed.
Verify all connections are clean and
tight, replace broken wire.
Verify 240 VAC at bake element.
No broil element operation
Open broil element .....................................
Loose wire connection or broken wire........
Open broil relay ..........................................
Check element for continuity,
replace if failed.
Verify all connections are clean and
tight, replace broken wire.
Verify 240 VAC at broil element.
Oven not operating
Programming error .....................................
Power outage .............................................
Unit in Sabbath mode.................................
Switch circuit breaker off to oven for
five minutes and try oven again.
Verify power is present at unit and
circuit breaker is not tripped.
Replace household fuse, but do not
fuse capacity.
Refer to Use & Care manual and
remove unit from Sabbath mode.
Clock and timer not working
Power outage .............................................
Electronic Control locked............................
Verify power is present at unit and
circuit breaker is not tripped.
Replace household fuse, but do not
fuse capacity.
Refer to Use and Care manual and
unlock electronic control.
Oven light does not operate
Failed oven lamp ........................................
Failed wiring ...............................................
Failed light socket.......................................
Check lamp and replace is
necessary.
Check for broken, loose or dirty
connections.
Check light socket for continuity.
Oven door will not unlock
Oven is self-cleaning ..................................
Oven is still hot ...........................................
Allow cycle to complete.
Will not unlock until unit has cooled
to safe temperature. Do not force
door open, this will void warranty.
Blow cool air on door latch area to
quicken process.
Oven smokes/odor first few
times of usage
Normal........................................................
Minor smoking or order is normal
the first few times of oven usage.
Ventilate area well and perform
self-clean cycle.
Surface element doesn’t heat Open element.............................................
Loose wire connection or broken wire........
Failed infinite switch ...................................
Check element for continuity,
replace if failed.
Verify all connections are clean and
tight, replace broken wiring.
Check infinite switch, replace if
failed.
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 54 55

Comments to this Manuals

No comments