Maytag 111405-1 Service Manual download pdf (Page 32)

16021730 Rev. 0 32

9. Install the new PC board/frame assembly in

reverse order of removal.

Touch Fountain Assembly Removal

1. Shut the main power switch off.

2. Perform steps 1 through 7 of the PC Board/

Frame Removal.

Figure 1

Mounting Screws

3.Remove the two touch fountain assembly

mounting screws (figure 1).

4. Remove the old assembly and install the new

assembly in reverse order of removal.

Fountain Bracket Assembly Removal

1. Shut the main power switch off.

2. Perform steps 1 through 7 of the PC Board

Frame Removal.

Figure 1

Fountain Bracket

Mounting Screws

3. Remove the three fountain bracket mounting

screws.

4. Carefully pull the assembly out of the fountain

housing. You now have full access to the

solenoid, dispenser mechanism, light socket

and the actuator switch.

5. To repair the assembly , disconnect the electrical

quick disconnect.

Checking and Replacing the Actuator Switch:

1. Disconnect the unit from the power Source.

2. Perform steps 1 through 5 of Fountain Bracket

Assembly Removal.

3. Continuity check the actuator switch shown in

figure 1.

ure 6

8. Disconnect the electrical lead from the fountain

PC board/frame assembly.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 77 78

No comments

Maytag 111405-1 Service Manual Page 32