Maytag 111405-1 Service Manual download pdf (Page 57)

10

FREEZER COMPARTMENT

ADJUSTABLE

WIRE SHELVES

TO REMOVE WIRE SHELVES:

•Completely unload the shelf or remove

basket.

• Lift up the rear of the shelf slightly.

• Pull the shelf straight out.

TO LOCK THE SHELF INTO

ANOTHER POSITION:

• Tilt up the front edge of the shelf.

• Lift up the rear of the shelf.

• Insert the hooks into the desired frame

openings.

• Let the shelf settle into place.

Be sure the shelf is level and securely

locked at the rear before reloading it with

food.

FREEZER ELEVATOR™

SHELF

This shelf can be

adjusted up or

down without

being unloaded.

To adjust the

height, pull out

the knob on the handle built into the shelf

front. Turn the handle clockwise to raise

the shelf and counterclockwise to lower

the height of the shelf.

TO REMOVE SHELF:

•Completely unload the shelf.

• Slide the shelf out until it stops.

• Push up the tabs under the outside

edges of the shelf behind the bracket

and continue pulling the shelf out, clear

of the frame.

TO REINSTALL SHELF:

• Align the shelf into the guides on the

frame.

• Push the shelf all the way back. (It is not

necessary to push up the tabs for rein-

stallation).

In ordinary use, the Elevator™ shelf frame

assembly does NOT require removal.

In the unlikely event that the assembly

needs removal, it is important to follow the

correct removal procedure. See page 7.

WIRE FREEZER

BASKETS

To load or

retrieve items

from a freezer

basket, pull the

drawer for-

ward.

TO REMOVE:

• Pull out the drawer out until it stops.

• Tilt up the front of the basket.

• Lift it completely out.

TO REPLACE:

• Place basket on extended tracks.

• Place tabs on basket sides under tabs on

track. Drawers should sit flat on track.

• Push drawer all the way in.

ICE DRAWER

(Non-dispenser Models)

The automatic icemaker keeps this

drawer stocked with ice. To retrieve ice,

pull open the drawer.

TO REMOVE:

• Pull out the drawer until it stops.

• Reach into the drawer compartment

and move the wire lever arm on the ice-

maker into the up (OFF) position.

• Lift the front of the drawer up.

• Pull the drawer completely out.

TO REINSTALL:

• Align the drawer sides onto the

matching side rails.

• Reach into the drawer compartment

and move the wire lever arm on the ice-

maker into the down (ON) position.

• Push the drawer in.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 77 78

Comments to this Manuals

No comments