Maytag MFI2266AEW User Manual download pdf (Page 7)

Installation

Pullout Freezer Drawer

To avoid electrical shock which can cause severe

personal injury or death, disconnect power to

refrigerator

before removing doors. After replacing

doors, connect power.

WARNING

To avoid possible injury, product, or property

damage, you will need two people to perform the

following instructions.

Important: Always unload

food in freezer trays

before removing trays.

CAUTION

3. Remove Phillips screws from

each of the drawer slides.

Door Reinstallation

1. Install hinge assemblies:

• Install center hinges with Phillips or hex screws.

2. Place hinge side of refrigerator

door on center hinge pin.

• Install top hinge with

⁄1

” hex

head screws.

3. While holding refrigerator door upright, tighten

down top hinge with

⁄16” hex head driver.

4. Reconnect connector.

Connect the waterline tubes firmly by pushing one

waterline inside the other.

6. Slide the black locking collar fully forward.

7. Hold tabbed section of

waterline.

8. Rotate black locking collar

counterclockwise locking

water lines in place. A

“click” is heard ensuring

waterlines are correctly

locked in place. The “arrow”

on the t

abbed section

should align with the 2 bars

on the black locking collar.

Ensure the connection doe

s not leak

before

installing the upper hinge cover.

10. Replace top hinge covers.

To Remove:

Pull drawer open to full

extension.

Slide freezer bins forward and

lift straight out.

4. Lift top of drawer front to

unhook the drawer from the

slides.

5. Move drawer slides fully

forward.

6. Lift out lower drawer assembly.

Connector

Tabs

1 2 3 4 5 6 7 8 9 10 11 12 ... 95 96

Comments to this Manuals

No comments

Maytag MFI2266AEW User Manual Page 7

Comments to this Manuals

Related products and manuals for Fridges Maytag MFI2266AEW