Maytag MFI2266AEW User Manual download pdf (Page 17)

Fresh Food Features

Shelves

To avoid personal injury or property damage,

observe the following:

• Never attempt to adjust a shelf that is loaded with

food.

• Confirm shelf is secure

before placing items on

shelf.

• Handle tempered glass shelves carefully. Shelves

may break suddenly if nicked, scratched, or

exposed to sudden temperature change.

CAUTION

Spill-Catcher

Glass Shelves

Your refrigerator has Spill-Catcher

glass shelves. The

shelves have a spill retainer edge which allows for

easier clean up and some are equipped with a slide

out feature. To slide out, grasp the front of the shelf

and pull forward. Push in the shelf to return to the

original position.

To Remove a Shelf:

• Slightly tilt up the front and lift up

the rear of the shelf

, then pull the

shelf straight out.

To Lock the Shelf Into Another

Position:

• Tilt up the front edge of the shelf.

•

Insert the hook into the desired frame openings and

let the shelf settle into place.

• Be sure the shelf is securely locked at the rear.

Latches

Slide Out

EasyGlide ShelfEasyGlide Shelf

(style may vary)

Elevator™ Shelf (select models)

he Elevator™ Shelf is equipped with a spill-ret

aining

edge and the EasyGlide™ slide-out feature. It can be

adjusted up or down without unloading.

To Slide Out EasyGlide™ Shelf:

• Grasp the front of the shelf and pull forward.

• Push the shelf in to return to original position.

To Adjust the Elevator™ Shelf:

• Pull out the knob on the crank handle.

• Rotate the crank

clockwise to raise the shelf, and

counterclockwise to lower the height of the shelf.

To Remove Elevator™ Shelf:

• Completely unload the shelf and pull the shelf

forward.

• Pull until the shelf stops.

• Slightly tilt up the front and pull the shelf straight

out. Continue pulling forward until the shelf is clear

of the frame.

To Replace Elevator™ Shelf:

• Align the shelf to the frame and push it all the way

back.

In ordinary use, the Elevator™ Shelf frame assembly

does

NOT require removal. Though unlikely, and not

recommended, the correct removal procedure is as

follows:

To Remove Frame Assembly:

• Unload the shelf completely.

• Slide the shelf forward about 2” and manually move

the two rear latches toward the shelf center.

• While supporting the entire shelf and frame from

underneath, lift slightly and rotate the assembly

approximately 30° to allow the rear mechanism to

clear the vertical rear side rails.

• The entire assembly can then be moved forward and

clear of the refrigerator compartment.

To Reinstall F

rame Assembly:

• Reverse the removal procedure. Be sure the shelf is

in a level position. W

hen the sliding shelf is pushed

to the rear, it will reposition the rear latches to their

correct operating position.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 95 96

Comments to this Manuals

No comments

Maytag MFI2266AEW User Manual Page 17

Comments to this Manuals

Related products and manuals for Fridges Maytag MFI2266AEW