Maytag W10385090A Use and Care Guide download pdf (Page 5)

CHECK YOUR SYSTB FOR GOOD AIR FLOW

Fire Hazard

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent,

Failure to follow these instructions can result in death

or fire.

Good air flow

Along with heat, dryers require good air flow to efficiently

dry laundry. Proper venting will reduce your drying times

and improve your energy savings. See "Installation

Instructions".

The venting system attached to the dryer plays a big role in

good air flow.

Service calls caused by improper venting are not covered

by the warranty and will be paid by the customer, regardless

of who installed the dryer.

Maintain good air flow by:

[] Cleaning your lint screen before each load.

[] Replace plastic or foil vent material

with 4" (102 mm) diameter heavy, rigid

vent material.

[] Use the shortest length of vent possible.

[] Use no more than four 90 ° elbows in a vent system;

each bend and curve reduces air flow.

[]

Remove lint and debris from the exhaust hood.

Remove lint from the entire length of the vent system

at least every 2 years. When cleaning is complete, be

sure to follow the "Installation Instructions" supplied

with your dryer for final product check.

Clear away items from the front the dryer.

Use Sensor Cycles for better fabric care and energy savings

Use the Sensor Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Sensor Cycles,

drying air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer

shuts off when the load reaches the selected dryness. Use the NORMAL DRY dryness level to provide optimal energy savings.

With Timed Cycles, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to

over=drying. Use Timed Cycles for the occasional damp load that needs a little more drying time or when using the drying rack.

Tips for getting the best performance from your steam dryer (on some models)

[] Results may vary depending on fabric. 100% cotton [] The Custom Refresh Cycle is best for smoothing out

garments with wrinkle-free finish may yield better results wrinkles and reducing odors from loads consisting of

than those without. 100% cotton items may require small numbers of dry items of wrinkle-free cotton, cotton-

additional touching up after the Steam Cycle. polyester blend, common knits, and synthetic garments.

Use of dryer sheet is not recommended with Steam Cycles. [] The Auto Refresh Cycle is best for smoothing out wrinkles

It may cause temporary staining on clothes, from clothes that have been left in the dryer too long. For

It is not recommended to use Steam Cycles for items that best results, do not overload the dryer.

have been starched. Wash any starched or new garments

prior to using a Steam Cycle.

[]

1 2 3 4 5 6 ... 80

Comments to this Manuals

No comments

Maytag W10385090A Use and Care Guide Page 5

Comments to this Manuals

Related products and manuals for Electric laundry dryers Maytag W10385090A