Maytag W10385090A Use and Care Guide download pdf (Page 47)

CYCLE SIGNAL

Use this button to turn the signal indicating the

end of a drying cycle on or off.

Control Lock

If the dryer is running:

Press and hold the Cycle Signal button for 3

seconds to lock the controls of the dryer and

avoid an accidental change in cycle options

or settings during a drying cycle. Press and

hold again for 3 seconds to unlock.

To enable the Control Lock feature if the dryer

is off, it is not necessary to press POWER

before activating the Control Lock feature.

cycle 0

sLgnat

press _ hold to (_3

IOCKIunlock

controls J

CYCLE STATUS INDICATORS

Steam model shown

The Cycle Status Indicators show the progress of a cycle.

Sensing

The Sensing indicator will light during Sensor Cycles to

indicate that the moisture sensor on the dryer is operating.

This indicator will not light during Timed Cycles or options

such as Wrinkle Prevent '_.

Wet

The load is still wet and/or the cycle just started.

In the Custom Refresh or the Auto Refresh Steam Cycles

(on some models), the Wet indicator comes on after the

water has been sprayed into the drum, 4-5 minutes into the

cycle. The Wet light illuminates until the dryer goes into Cool

Down with 1 minute of time remaining.

Damp

This indicator is used with Sensor cycles to show that the

load is partially dried and items that you may wish to hang

up or iron while still damp may removed.

Cool Down

The dryer has finished drying with heat, and is now tumbling

the load without heat to cool it down and reduce wrinkling.

Done

This will indicate that the selected cycle has ended and the

load may be removed from the dryer. If the Wrinkle Prevent

option has been selected, the dryer may continue to tumble

the load, even if the Done indicator is lit.

Wrinkle Prevent TM

This indicator will light if the Wrinkle Prevent option has been

selected and is running. The dryer will continue to tumble the

load for up to 90 minutes after the cycle has ended.

Steam (on some models)

This indicator will light when the Steam function is active.

NOTE: Steam is not available on all models or on all cycles.

Controls Locked

This indicator will light when the controls are locked. Press

and hold the Cycle Signal button for 3 seconds to unlock.

1 ... 46 47 48 ... 80

Comments to this Manuals

No comments

Maytag W10385090A Use and Care Guide Page 47

Comments to this Manuals

Related products and manuals for Electric laundry dryers Maytag W10385090A