Maytag W10385090A Use and Care Guide download pdf (Page 11)

5, Adjust cycle settings, if desired

more 0time

less 0time

[]

cycte 0signat

press&hold to (_

tod¢/unl_k __j

co,trots

Steam model shown options and modifiers

You may adjust different settings, depending on whether

you have selected a Sensor Cycle, Timed Cycle, or Steam

Cycle (on some models). See the "Cycle Guide" for detailed

information.

NOTE: Not all options and settings are available with all cycles.

Not all cycles are on all models.

Sensor Cycles:

You can select a different dryness level, depending on your

load, by pressing the button for More, Normal, or Less.

Selecting More, Normal, or Less automatically adjusts the

dryness level at which the dryer will shut off. Once a dryness

level is set, it cannot be changed without stopping the cycle.

Sensor Cycles give the best drying in the shortest time.

Drying time varies based on fabric type, load size, and

dryness setting.

Timed Cycles:

When you select a Timed Cycle, the

default time appears in the display.

Use the More Time and Less Time time

k_J

buttons to increase or decrease the time

in 1 minute increments. Press and hold to less

change the time in 5 minute increments, time\_j

The default temperature may be changed

by pressing the Temp Level button until the desired dry

temperature is lit.

Steam Cycles (on some models):

Steam cycles add an extra boost of steam to help reduce

odors and loosen wrinkles.

Custom Refresh: Use to reduce odors and light wrinkles from

small loads of 3-4 items.

Auto Refresh: Use to reduce wrinkles, including from loads left

in the dryer too long.

6, Press and hold START/PAUSE

to begin cycle

start

pause

Press and hold the START/PAUSE button to begin the cycle.

7, Remove garments promptly

after cycle is finished

Steam model shown

{ wrinkle 1prevent

Promptly remove garments after cycle

has completed to reduce wrinkling. If

you will be unable to remove the load

promptly, select the Wrinkle Prevent TM option before pressing

START/PAUSE to add up to 90 minutes of periodic tumbling

after the end of the drying cycle.

the Sensor Cycle settings

to increase drying time

If all your loads on all Sensor Cycles are consistently

not as dry as you would like, you may change the default

settings to increase the default dryness level.

Your automatic drying settings can be adjusted to adapt to

different installations, environmental conditions or personal

preference. This change is retained and will affect all of your

Automatic cycles, not just the current cycle/load. There

are 3 drying settings, which are displayed using the time

display:

01 Factory preset dryness level.

02 Slightly drier clothes, 15% more drying time.

03 Much drier clothes, 30% more drying time.

To change the drying settings:

NOTE: The settings cannot be changed while the dryer is

running or paused. The dryer must be in standby mode (the

power button is off) to adjust the default settings.

1. Before starting a cycle, press and hold the TEMP LEVEL

button for 6 seconds.

2. Press the TEMP LEVEL button to select the dryness

level shown in the time display: 1,2, or 3.

3. Press START/PAUSE to save the new dryness level

setting.

1 ... 10 11 12 ... 80

Comments to this Manuals

No comments

Maytag W10385090A Use and Care Guide Page 11

Comments to this Manuals

Related products and manuals for Electric laundry dryers Maytag W10385090A