Maytag JMW8530DA Series Use and Care Guide Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 72
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
28
6. To change the oven temperature, touch the temperature tab
to move to the Temperature screen. Use the slider to enter a
desired cooking temperature or touch the -5ºF (-1ºC) or +5ºF
(+1ºC) buttons. The temperature must be between 170ºF
(77ºC) and 550ºF (288ºC).
7. To set a delayed start, touch Delay Start and set desired time.
See “Delay Start” section for additional information.
8. To remove probe temperature, but keep current mode and
cavity temperature, touch CANCEL PROBE button.
9. Touch START to begin cooking with the probe.
10. At the end of some functions that use the probe, you will have
the option to Add Browning. If Add Browning is selected,
monitor the food and remove it from the oven when desired
browning has been achieved.
Delay Start
Delay Start allows the oven(s) to be set to turn on at a certain
time of day.
Delay Start should not be used for food such as breads and
cakes because they may not bake properly.
Delay Start is available with any cycle that has a Delay Start
button.
To Set a Delay Start:
1. From any mode with the Delay Start button available, press
DELAY START. Delay Start is available on the Timer Not Set/
Cook Time screen or the Temperature screen.
2. Set time of day you would like the oven to start heating by
using the slider to enter a desired time or press the “-15min
or “+15min” buttons. These buttons decrease or increase the
selected time and also move the slider.
3. Touch SET DELAY.
4. To change the previously set delay start time, touch the Start
Time, make necessary changes, and touch SET DELAY.
Delay with Cook Timer:
1. If Delay with Cook Timer is desired, select Timer Not Set or
Cook Timer.
2. Program desired cook time.
3. (Optional) Touch Delay Start. The difference between the start
and end time should equal the cook time.
4. (Optional) Select Keep Warm: ON to set Keep Warm to come
on after the cook time expires.
5. Use the slider to enter a desired begin and end time or press
the “-15min” or “+15min” buttons. These buttons decrease or
increase the selected begin/end time and also move the
slider.
6. Touch SET DELAY.
Delay with Probe:
1. If Delay is chosen when the probe is in use, select Delay Start
when at the Probe Temp screen, then select when cooking
should begin. Because the probe controls the end time, the
end time will not be displayed.
2. Use the slider to enter a desired begin time or press the
“-15min” or “+15min” buttons. These buttons decrease or
increase the selected begin and also move the slider.
3. The oven will automatically keep the food warm when the
probe reaches the target temperature.
4. Touch SET DELAY.
Delay for Clean:
1. If Delay for Clean is desired, select Delay Start after selecting
the Cleaning level. Select when cleaning should begin. The
oven will calculate the end time based on your cleaning level
choice.
2. Use the slider to enter a desired begin and end time or press
the “-15min” or “+15min” buttons. These buttons decrease or
increase the selected begin/end time and also move the
slider.
3. The oven will cool for an additional hour after cleaning is
completed.
4. Touch SET DELAY.
OVEN CARE
CustomClean™ Self-Cleaning with
Adjustable Levels and Auto Lock
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off during the Self-Clean cycle. Exposure to the
fumes may result in death to certain birds. Always move birds to
another closed and well-ventilated room.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
WARNING
Burn Hazard
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to follow these instructions can result in burns.
WARNING
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
Page view 27
1 ... 27 28 29 ... 72

Comments to this Manuals

No comments