Maytag W10336164A User Manual download pdf (Page 6)

1. Unplug refrigerator or disconnect power.

2. Remove the base grille. Grasp the grille firmly and pull it

toward you.

3. Starting with the right-hand side door, remove the parts for

the top hinge as shown in Top Hinge graphic. Lift the

refrigerator door from the bottom hinge pin.

4. Remove the top hinge cover from left-hand side refrigerator

door.

5. Disconnect the wiring plug located on top of the hinge by

wedging a flat-blade screwdriver or your fingernail between

the two sections. See Connections graphic.

6. Disconnect the water line by pulling back on the locking collar

while pulling the water line out of the water line connector.

See Connections graphic.

7. Remove the parts for the top hinge as shown in Top Hinge

graphic. Lift the left-hand side door from the bottom hinge

pin.

8. Using a ³⁄₈" hex wrench, remove the leveling leg brackets from

the bottom of the cabinet. Keep screws for later use.

Replace Doors and Hinges

1. Assemble the parts for the top hinge as shown in Top Hinge

graphic. Do not tighten the screws completely.

2. Replace the parts for the bottom hinge as shown in Bottom

Hinge graphic. Tighten screws. Replace the refrigerator door.

NOTE: Provide additional support for the refrigerator door

while the hinges are being moved. Do not depend on the door

gasket magnets to hold the door in place while you are

working.

3. Align the door so that the bottom of the refrigerator door

aligns evenly with the top of the freezer drawer. Tighten all

screws.

4. Reconnect the wiring plug on top of the left-hand side

refrigerator door.

5. Reconnect the water line by pulling back the locking collar

ring while firmly pushing the water line into the connector.

6. Check for leaks. Replace the top hinge covers.

Remove and Replace Refrigerator Drawer and Freezer

Drawer

IMPORTANT: Two people may be required to remove and

replace the freezer drawer. Graphics are included later in this

section.

Remove Drawer Front

1. Open the drawer to full extension.

2. Loosen the two top screws attaching the drawer glide

brackets to the drawer front. See Drawer Front Removal

graphic.

NOTE: Loosen screws three to four turns. Keep the screws in

the drawer front.

3. Remove the two bottom screws attaching the drawer glide

brackets to the drawer front.

4. Lift the drawer front up and off the top screws. See Drawer

Front Removal graphic.

Replace Drawer Front

1. Slide the drawer glides out of the compartment. Insert the

two screws in the drawer front into the upper slots in the

drawer glide brackets. See Drawer Front Replacement

graphic.

2. Align the drawer glide brackets with the lower holes in the

drawer front and refasten with the screws. See Drawer Front

Replacement graphic.

3. Completely tighten the four screws.

Final Steps

1. Replace the base grille.

2. Plug into a grounded 3 prong outlet.

3. Return all removable parts to doors and drawer and food to

refrigerator and freezer.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

1 2 3 4 5 6 7 8 9 10 11 ... 61 62

Comments to this Manuals

No comments

Maytag W10336164A User Manual Page 6

Comments to this Manuals

Related products and manuals for Fridges Maytag W10336164A