Maytag WINSLOW PI40 User Manual download pdf (Page 9)

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

A = Clearance above grade, veranda, porch, deck, or balcony (min.

12”/30cm)

B = Clearance to window or door that may be opened (min. 12”/30cm

above - 48”/1.2m below and to the side)

C = Clearance to permanently closed window *(min. 12”/30cm)

D = Vertical clearance to ventilated sofﬁt located above the terminal

within a horizontal distance of *(min. 24”/60cm) from the center-

line of the terminal (min. 22”/55cm) check with local code.

E = Clearance to unventilated sofﬁt *(min. 12”/30cm)

F = Clearance to outside corner *(min. 12”/30cm)

G = Clearance to inside corner *(min. 12”/30cm)

H = Not to be installed above a meter/regulator assembly within *(min.

36”/90cm) horizontally from the centerline of the regulator.

J = Clearance to service regulator vent outlet *(min. 72”/1.8m)

K = Clearance to non-mechanical air supply inlet to building or the

combustion air inlet to any other appliance *(min. 48”/1.2m)

L = Clearance to a mechanical air supply inlet *(min. 120”/3.1m)

M = **Clearance above paved sidewalk or a paved driveway located on

public property *(min. 84”/2.1m)

N = ***Clearance under veranda, porch, deck, or balcony (min.

12”/30cm)

Note:

* Local codes or regulations may require different clearances.

** A vent shall not terminate directly above a sidewalk or paved

driveway which is located between two single family dwellings

and serves both dwellings.

*** Only permitted if veranda, porch, deck, or balcony is fully open on

a minimum of two sides beneath the ﬂoor.

Vent Terminal

Area Where Terminal Is Not Permitted

(From Eave)

Vertical Terminal

Fixed Closed

Able To Open

24”

(610mm)

Air Supply Inlet

24”

(610mm)

Figure 9

Vent Termination Locations

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

No comments

Maytag WINSLOW PI40 User Manual Page 9