Maytag WINSLOW PI40 User Manual download pdf (Page 17)

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

Log Set Installation Instructions

Kit Contents

(refer to Figure 30)

Cat. No. #H5142

Qty

(1) left log (B)

(1) right log (C)

(1) front log (D)

(2) log support brackets (E)

cut lines

Bracket correctly placed

Figure 30

Figure 31

Figure 33

Figure 32

Tools Required

None

CAUTION: The logs can be damaged if they are not handled

with care!

To Install the log set:

1. Remove the two log support brackets from the box and bend the ends

of the brackets 90 degrees at the cut lines. See Figure 31.

2. One bracket goes into the left corner and the other into the right corner

of the ﬁrebox. Rotate the brackets so they are placed as shown in

Figure 32

. The bracket ﬁts between the back of the ﬁrebox and the

air wash at the front of the insert.

3. Remove the ceramic logs from the box and carefully unwrap them.

Position each back log (Figure 33, B, C) in their proper place, one

on each side against the back of the ﬁrebox.

4. The front log should face the front of the ﬁrebox with the wood grain

showing. It should rest on the other two back logs. See Figure 33

for assembled log set.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

Maytag WINSLOW PI40 User Manual Page 17