Maytag WINSLOW PI40 User Manual download pdf (Page 6)

Front View

Figures 3 and 5

shows the minimum sized ﬁreplace required for the

Winslow™ PI40 insert when any of the four non-extended surround

sizes are used.

With the hopper at its largest size (as shipped from the factory), the

ﬁreplace needs to be a minimum of 22-1/2” (572 mm) high. When the

hopper is adjusted to its smallest size (see “Adjustable Hopper”), the

ﬁreplace needs to be a minimum of 19” (483 mm) high.

Side View

Control

Board

Side

Surround

Panel

2-1/2” Minimum Screen Pocket is Needed for the Control

Board (not applicable if P/N 79032 ZC Surround Kit is used*)

15-1/2”

(394mm)

15”

(381mm)

23” (584mm)

Minimum

36” (914mm)

Minimum*

Figure 1

Figure 2

Existing 8” Flue

Flex Pipe

Exhaust Collar

8-3/4”

(222mm)

Min.

W/Hopper Extension 21-13/16” (554mm)

W/O Hopper Extension 18-5/16” (465mm)

15”

(381mm)

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

15-1/4”

(387mm)

19”

(483mm)

29-3/4”

(756mm)

14-3/8”

(365mm)

26-1/4”

(667mm)

23-3/8”

(594mm)

26”

(660mm)

Figure 3

Figure 4

Figure 5

INSERT DIMENSIONS

MINIMUM FIREPLACE SIZE

* This ﬁreplace insert can ﬁt into a ﬁreplace with a narrower width in the front

(32” min. instead of 36” min.) when the 3” Deep ZC Surround Kit is used (P/N

79032). See Figure 11C on Page 11 for more information. Please take note

that because the appliance will be positioned in a more forward position on

the existing hearth, additional ﬂoor protection may need to be added to the

front of the appliance (see Figure 7).

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comments to this Manuals

No comments

Maytag WINSLOW PI40 User Manual Page 6

Comments to this Manuals

Related products and manuals for Stoves Maytag WINSLOW PI40