Maytag M1200 Use and Care Manual download pdf (Page 10)

3.6 Steam Ironing

1. Fill the Removable Water Tank following “Filling

Removable Water Tank.” See page 5 (section 3.3).

2. Move the Steam Control/Self-Clean to the desired

steam level. See Figure I.

3. Plug in the iron to a grounded outlet while on its

heel.

4. Turn on the iron and set the Temperature Setting Figure I

to the appropriate setting for your fabric. See

“Setting Temperature and Turning on Your Iron.” See section 3.4.

5. Temperatures preheat takes about 60 seconds or less depending on your Temperature

Control Setting.

6. Begin to steam iron.

7. When finished ironing, ensure to turn off the iron by following the section “Turning Off

Your Iron”. See section 3.5.

3.7 Dry Ironing

1. Make sure the Steam Control/Self-Clean is set to the

offsetting.

We recommend using with an empty Removable Water Tank for Dry

Ironing.

See Figure J.

2. Plug in the iron to a grounded outlet while on its heel.

3. Turn on the iron and set the Temperature Setting to the

appropriate setting for your fabric. See “Setting

Temperature and Turning on Your Iron.”

See section 3.4. Figure J

4. Temperatures preheat takes about 60 seconds or less depending on your Temperature

Setting.

5. Begin to dry iron.

6. When finished ironing, ensure to turn off the iron by following the section “Turning Off

Your Iron”. See section 3.5.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

No comments

Maytag M1200 Use and Care Manual Page 10