Maytag M1200 Use and Care Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
9
3.8 Spray (see Figure K)
Water can be sprayed at any setting as long as the Removable Water Tank is filled with
water.
1. Fill the Removable Water Tank following “Filling Removable Water Tank” section.
See section 3.3.
2. Aim the spray nozzle at your desired
area.
3. Press the Spray Button control. See
section 3.2.2.
4. If the spray is weak, try pushing the
button a few times to pump water.
5. Iron away. Figure K
6. When finished ironing, ensure to turn off the iron by following the section “Turning Off
Your Iron”. See section 3.5.
3.9 Vertical Steam Burst (See Figure L)
This allows you to remove wrinkles from hanging cloths,
curtains and other hanging fabrics.
1. Follow instructions in “Steam Ironing.” See section 3.6.
2. Hang the garment up to be steamed.
3. Turn the Steam Control/Self-Clean to high.
4. Plug in the iron to a grounded outlet while on its heel.
Figure L
5. Turn on the iron and set the Temperature Control Setting to the appropriate setting for
your fabric. See “Setting Temperature and Turning on Your Iron.” See section 3.4.
6. Temperatures preheat takes about 60 seconds or less depending on your Temperature
Control Setting.
7. Hold the iron upright and close to, but never touching the fabric (about 6 inches away).
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Comments to this Manuals

No comments