Maytag MSD2359KE User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
Component Specifications
16025987 January 2005
© 2005 Maytag Services
2
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury, disconnect unit from power before
servicing unless tests require power. Discharge capacitors through a 10,000-ohm resistor before handling. Wires
removed during disassembly must be replaced on correct terminals to ensure proper grounding and polarization.
Component Specifications all parts
115VAC/60HZ unless noted
Compressor run capacitor Volt.....................................................
Capacitance ......................................
220 VAC
15 µfd ± 10%
Compressor BTUH .................................................
Watt ...................................................
Current Lock rotor ..............................
Current Full load ................................
Resistance Run windings...................
Resistance Start windings..................
905 BTUH
60 Hz / 153 watts
19.0 amps± 15%
1.26 amps± 15%
3.33 ohms± 15%
4.28 ohms± 15%
Electric damper control Maximum closing time
Temperature Rating
RPM
36 seconds
20°F- 110°F
1
Thermistor Temperature
77°F....................................................
36°F ...................................................
0°F......................................................
Resistance
10,000 ohms± 1.8%
29,500 ohms± 1.0%
86,300 ohms± 1.8%
Condenser motor Rotation (facing end opposite shaft)
RPM
Watt....................................................
Current ...............................................
Clockwise
1120 RPM
3.4 watts±15%@115VAC
0.085 amps± 15%@115VAC
Evaporator fan motor Rotation (facing end opposite shaft)
RPM……………………………………
Watt…………………………………….
Note: Fan blade must be fully seated
on shaft to achieve proper airflow.
Clockwise
2800 RPM
6.0 ±15% watts@115 VAC
Overload/Relay Ult. trip amps @ 158°F (70°C) ...........
Close temperature ...........................
Open temperature............................
Short time trip (seconds)....................
Short time trip (amps @77°F (25°C)..
2.67 amps± 15%
142°F ±9°
284°F ±9°
10 seconds ±5
11 amps ±2amps
Thermostat (Defrost) Volt ....................................................
Watt ...................................................
Current ...............................................
Resistance across terminals:
Above 42°F ±5°..................................
Below 12°F ±7° ..................................
120/240 VAC
495 watts
5.8/2.9 amps
Open
Closed
Evaporator heater
22 & 26 cu. ft
Volt.....................................................
Wattage .............................................
Resistance .........................................
115 VAC
450 ±5% watts @ 115VAC
29 ±5% ohms
Evaporator heater
23 cu. ft
Volt.....................................................
Wattage .............................................
Resistance .........................................
115 VAC
350 ±5% watts @ 115VAC
37.8 ±5% ohms
Control board Volt.....................................................
120VAC, 60 HZ
See Control board troubleshooting section
Auger Motor Rotation (facing end opposite shaft)
RPM...................................................
Power to blue and white is clockwise. Power to orange and white is
counterclockwise
17± 3 RPM
Water Valve Watts.................................................. Brown side 35w,Yellow side 20w
Super Cool Fan Rotation (facing end opposite leads)
RPM……………………………………
Watt……………………………………
Counterclockwise
1530 ± 250
1.2 @ 12 VDC
Light switch / Interlock Type……………………………………..
Volt………………………………………
Current…………………………………..
SPDT NO/NC
125/250 VAC
8/4 amps
Solenoid (Ice Chute) Resistance across leads....................
101ohms ± 10%
Page view 1
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments