Maytag MSD2359KE User Manual download pdf (Page 3)

Service Specifications

January 2005 16025987

WARNING

To avoid risk of electrical shock that can cause death or severe personal injury, disconnect unit from power before

servicing unless tests require power. Discharge capacitors through a 10,000-ohm resistor before handling. Wires

removed during disassembly must be replaced on correct terminals to ensure proper grounding and polarization.

Programming Mode:

NOTE: The Program Code is located on the Serial Plate on this unit after the word Code.

1. Open the Fresh Food door and press and hold the Door Alarm Keypad

Door

larm

2. Press and hold Freezer Temperature Down Keypad

3. Release the Door Alarm Keypad

Door

larm

and wait 3 seconds.

4. The control will display PE to indicate the programming mode.

Fast

Ice

Reset

Filter

Vacation

Mode

Tem p

Alert

Door

Alarm

Max

Cool

Freezer

Refrigerator

Order Replace

5. Entry is confirmed by pressing the Freezer Temperature Down Keypad

once more.

6. The control will display the current Program CODE. This value should be validated with the Program CODE

printed on the unit serial plate.

PE0

Fast

Ice

Reset

Filter

Vacation

Mode

Temp

Alert

Door

Alarm

Max

Cool

Freezer

Refrigerator

Order Replace

000

NOTE: If the Program CODE is correct, the Programming Mode is exited by closing the Refrigerator door(s).

7. Press the Refrigerator Temperature UP Keypad

or Refrigerator Down Keypad

to change the digit

value with each key press.

8. The decimal point indicates the selected digit. Press the Freezer Temperature UP Keypad

to select the

next digit.

9. Once the desired Program CODE is entered, press and hold the Freezer Temperature DOWN Keypad

until the Program CODE begins flashing indicating it has been saved.

NOTE: If you attempt to enter an invalid Program CODE the control will not save the new code, but will beep. (The

unit will NOT run with a Program CODE of 0000).Once the Program CODE has been saved the

Programming Mode is exited by closing the Refrigerator door(s). If the new code is incorrect this process

should be repeated after closing the Refrigerator door(s).

The Programming mode can be exited at any time by closing the Refrigerator Door(s) or will exit if

unattended for four minutes.

Defrost Operation:

The Control Board adapts the compressor run time between defrosts to achieve optimum defrost intervals by

monitoring the length of time the defrost heater is on. After initial power up, defrost interval is 4 hours

compressor run time. Defrost occurs immediately after the 4 hours.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Maytag MSD2359KE User Manual Page 3

Comments to this Manuals

Related products and manuals for Fridges Maytag MSD2359KE