Maytag JTB2186 User Manual download pdf (Page 8)

7Interior Designs

Adjustable Features

Refrigerator Shelves

The Tempered Glass Cantilever Shelves can be posi-

tioned to suit your individual needs. In some models, these

shelves are sealed to contain any spills which might occur.

To remove a shelf:

• slightly lift up the rear of the shelf

• pull the shelf straight out

To lock the shelf into another position:

• tilt up the front edge of the shelf Slide-out shelves (certain models) can easily be pulled for-

, insert the hooks into the desired frame openings ward for access to foods placed at the rear.

• let the shelf settle into place To slide out:

• be sure the shelf is securely locked at the rear • grasp the front of the shelf and pull forward

• push in the shelf to return to the original position

_k WARNING -- Never attempt to adjust a shelf that is loaded with food (except in the case

of the Elevator TM Shelf).

ElevatoF _ Shelf

The fresh food compartment may be equipped with an press both locks inwards. Lift slightly and tilt the

ElevatorTM Shelf. This shelf has a spill retainer edge for easy frame assembly to allow the rear guides to clear the

cleanup. It also has the convenient slideout featurethat allows vertical rails.

easy access to items stored at the rear of the shelf. • To reinstall, tilt the flame assembly while depressing

This shelf can be adjusted up or down without having to be both locks, reposition the rear guide behind the verti-

unloaded of its contents. To adjust an Elevator TM Shelf, cal rails. When the shelf is level, release the locks

unfold the recessed crank handle so it is at a right angle to allowing the shelf to latch in the correct position.

the shelf front. Crank to the right (clockwise) to raise the

height of the shelf, and the left (counterclockwise) to lower

the height of the shelf.

VERTICAL RAILS

To remove the ElevatorTM shelf for occasional cleaning: REARGUIDES

• Completely unload the shelf. LOCKS

• Grasp the shelf front and pull forward until it stops.

• Press the stops from below (both sides) upward and con-

tinue pulling the shelf forward, clear of the frame.

• To reinstall, align the shelf to the frame and push it all

the way back. (There is no need to depress the stops for FRAMEASSEMBLY OUT SHELF

reinstallation).

In ordinary use, the ElevatorTM shelf with the frame assem-

bly does NOT require removal. Though unlikely,

and not recommended, the correct removal procedure is as

follows:

• Unload the shelf completely.

• While supporting the shelf and frame from the front,

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Comments to this Manuals

No comments

Maytag JTB2186 User Manual Page 8

Comments to this Manuals

Related products and manuals for Fridges Maytag JTB2186