Maytag W10285879A Use and Care Guide download pdf (Page 5)

Unpack the Refrigerator

Remove the Packaging

■ Remove tape and glue residue from surfaces before turning

on the refrigerator. Rub a small amount of liquid dish soap

over the adhesive with your fingers. Wipe with warm water

and dry.

■ Do not use sharp instruments, rubbing alcohol, flammable

fluids, or abrasive cleaners to remove tape or glue. These

products can damage the surface of your refrigerator. For

more information, see “Refrigerator Safety.”

■ Dispose of/recycle all packaging materials.

Clean Before Using

After you remove all of the package materials, clean the inside of

your refrigerator before using it. See the cleaning instructions in

“Refrigerator Care.”

Reverse Door Swing (optional)

Tools Needed: Phillips screwdriver

1. Unplug refrigerator or disconnect power.

2. Remove the screws from each side of the top of the

refrigerator cabinet and set aside.

NOTE: There are seven screws total. Do not discard.

3. Remove the hinge cover and washer and set aside.

Top View

4. Lift the door straight up and off of the bottom hinge.

5. Remove the screws fastening the bottom hinge and cover to

the bottom of the refrigerator cabinet. There are five screws

total.

6. Move the bottom hinge and cover each to the opposite side

of the bottom of the refrigerator cabinet. Completely tighten

the five screws.

Front View

7. Remove the two screws fastening the door stop spacer and

the door stop to the bottom of the refrigerator door.

8. Move the door stop spacer and the door stop to the opposite

side and fasten with the two screws. Completely tighten the

screws.

Bottom View

9. Place the washer onto the bottom hinge, then install the

refrigerator door onto the washer and hinge pin.

WARNING

Excessive Weight Hazard

Use two or more people to move and install

refrigerator.

Failure to do so can result in back or other injury.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for

cleaning or service, be sure to cover the floor with

cardboard or hardboard to avoid floor damage. Always pull

the refrigerator straight out when moving it. Do not wiggle or

“walk” the refrigerator when trying to move it, as floor

damage could occur.

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

A. Top of refrigerator cabinet

B. Hinge cover

C. Washer

A. Cover

B. Bottom of refrigerator cabinet

C. Bottom hinge

D. Washer

A. Bottom of refrigerator door

B. Door stop spacer

C. Door stop

A. Bottom hinge washer

B. Bottom hinge

1 2 3 4 5 6 7 8 9 10 ... 31 32

Comments to this Manuals

No comments

Maytag W10285879A Use and Care Guide Page 5

Comments to this Manuals

Related products and manuals for Fridges Maytag W10285879A