Maytag Performa 61005031 User Manual download pdf (Page 9)

Storing the Refrigerator

Vacations Moving

If you will be gone for a month or less, leave the con- When moving, follow steps a-d under VacatR

trols at the usual settings, addition, remove and carefully pack any items tl

During longer absences: easily removable. Ship the refrigerator in an u

a) remove all food, position with the doors taped shut.

b) shut off the ice maker (if installed) and the valve

where you tapped into the water line to supply the

refrigerator,

c) disconnect the refrigerator from the electrical

outlet,

d) clean and dry the refrigerator thoroughly,

e) leave the doors open to prevent odors.

Care & Cleaning

Refer to the chart on the following page for specific No Clean TM Commercial-dutl

refrigerator cleaning guidelines. Condenser

power cord before cleaning. ] A clean condenser means more efficient refrig

Disconnect the

operation. Thanks to the unique design of tl_

Cleaning Under the Refrigerator Clean'" condenser, there is no longer a need for r(

condenser cleaning in normal home usage surr,

Your refrigerator can be rolled out for cleaning the floor ings.

underneath. Raise the locking feet if engaged (see page Some operating environments may be partic

2). Pull the refrigerator straight out from the wall. dusty or greasy. In these situations, the condens_

be periodically cleaned to insure maximum effici

Replacing a Light Bulb

CAUTION: Disconnect the power cord before replacing light bulb(s). Wear gloves as protec;

against possible broken glass.

Always use a standard 40 or 60 watt appliance bulb.

Refrigerator Freezer

There is a light bulb located under the top of the refrig- Some models are equipped with a freezer light_

erator compartment, light is located on the back wall of the freezer con

• To remove the bulb cover: ment, near the upper right corner.

Squeeze the tabs at the base of the cover. Using To remove the bulb cover:

gentle downward pressure, the bulb cover should • Grasp the top and bottom of the bulb cover. Press

snap out. areas of the attachment tabs, applying enough pr_

• Unscrew the lightbulb and replace, to unhook the tabs. At the same time, pivot the

• Replace the bulb cover by snapping the tabs back down and remove.

into the appropriate slots. • Unscrew the lightbulb and replace.

• Replace the bulb cover by pivoting it back into plac

snapping the tabs into the appropriate slots.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Maytag Performa 61005031 User Manual Page 9