Maytag MGR5751BD User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 84
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Cooktop
To prevent the cooktop from discoloring or
staining:
CHeancooktop after each use.
Wipe acidic or sugary' spills as soon as the cooktop has
_ cooHedas these spills may discoHorthe
__ UnHikea range with standard gas burners,
this cooktop does not Hilt-up nor is it
removaMe. Do not attempt to lift the
%®_,' eooktop for arty reason°
Seamed Burners
The sealed burners of your range are secured to the cooktop
and are not designed to be removed. Since the burners are
seaHedinto the cooktop, boilovers or spills will not seep
underneath the cooktop. However, the burner should be
cleaned after each use. (See page 21 for cleaning directions._)
High Performance Burner
(12,000 BTU*)
There is one high speed burner on your range, located in the
right front position. This burner offers higher speed cooking
that can be used to quickly bring water to a boil and for large-
quantity' cooking.
Simmer Burner
This burner is located h the [eft rear position= The simmer
burner offers a lower BTU* flame for delicate sauces or for
me[thg chocolate=
BTUratings will vary when using LP gas.
Burner Grates
The grates must be properly positioned before cooking.
Improper installation of the grates may result in chipping of
the cooktop=
Do not operate the burners without a pan on the grate.
The grate's porcelain finish may chip withoat
a pan to absorb the heat from the burner
flame.
Although the burner grates are durable, they will
gradually lose their shine and!or discolor due to
the high temperatures of the gas flame.
Drip Pans - Optional
Removeab[e porcelain covered drip pans are available for use
with this appliance to help contah spills=Ca[[ 1-800-688-8408
to order,
o A propedy adjusted burner with dean ports will light
within a few seconds. [f using natural gas, the flame
will be blue with a deeper blue inner cone.
[f the burner flame is yellow or is noisy, the air/gas
mixture may be incorrect. Contact a service technician
to adjust. (Adjustments are not covered by the war-
ranty=_)
With LPgas, slight yellow tips on the flames are
acceptable. This is normal and adjustment is not
necessary'.
" With some types of gas, you may hear a "popping"
sound when the surface burner is turned off=This is a
normal operating sound of the burner.
" [f the control knob is turned very' quickly from H[ to
LO, the flame may go out, particularly if the burner is
cold. if this occurs, turn the knob to the OFF position,
wait several seconds and relight the burner.
" The flame should be adjusted so it does not extend
beyond the edge of the pan=
6
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 83 84

Comments to this Manuals

No comments