Maytag MGR5751BD User Manual download pdf (Page 6)

LO: Use to simmer foods, keep foods

warm and malt chocoDte or butter. Some

cooking may take pDce on the LO setting

if the pan is covered.

HI: Use to bring Hiquidto a boil or reach

pressure in a pressure cooker. AHways

reduce setting to a Howerheat when Hiquids

begin to boiHor foods begin to cook.

An intermediate flame size is used to

continue cooking. Food will not cook any

faster when a higher flame setting is used

than needed to maintain a gentile boil

Water boiHsat the same temperature

whether boiHinggentHyor vigorousHy.

Surface Controls

0 0 Graphics next to the knob identify which burner the

knob controHs. For exampHe,the graphic at Heftshows

0 0 the left front burner location.

- If flame should go out during a cooking operation, turn

[he burner off, If a strong gas odor is detected, open a

window and wait five minutes before reiighting the

burnel

o Be sure all surface controls are set in the OFF position

before supplying gas to the range.

- NEVER touch cooktop until it has cooled. Expect some

parts of the cooktop, especiail} around the burners, to

become warm or hot during cooking. Use potholders to

protect hands

Pilotless ignition

Pilotless ignition eliminates the need for a constant standing

pilot light. There are two ignitors for conventional surface

burners. Each sealed burner has a spark ignitor. When

cleaning around the surface burner use care. If cleaning cloth

should catch the ignitor, it could

damage it preventing ignitiot_ _HEAD

If the surface burner ///

doesnot,ght,check / t, \

ifignitorisbroke,,, (_

soiled or wet. If PORTS__'_'_'_'_'_'_'_'_'_/_ J

clogged, clean _.

the small port beneath tl}e __IGNITOR

ignitor using a straight pit,.

PORT BELOW IGNITOR

Surface Control Knobs

Use to turn on the surface burners. An infinite choice of heat

settings is available from LO to Hi. At the Hi setting a detent

or notch may be felt. The knobs can be set on or between any

of the settings.

Setting the controls:

The size and type of cookware will affect the heat setting. For

information on cookware and other factors affecting heat

settings, refer to "Cooking Made Simple" booklet.

1. Place a pan on the burner grate.

o The burner flame may lift off or appear separated from

the port if a pan is not placed on the grate.

2. Push in and turn the knob counterclockwise to the LITE

setting.

* A clicking [spark} sound will be heard and the burner

will light. (All four ignitors will spark when any surface

burner knob is turned to the LITE position.}

3. After the burner lights, turn knob to desired flame size.

* The ignitor will continue to spark until the knob is

turned past the LITE position.

Operating [}uring a

Power Failure

controls are in the OFF position, Strike the match first and

hold it inposition bdom turning the knob to LiTE,

1. Hold a lighted match to the desired surface burner head.

2. Push in and turn the control knob slowly to LmTE.

3. Once lit, adjust the flame to the desired level.

1 2 3 4 5 6 7 8 9 10 11 ... 83 84

Comments to this Manuals

No comments

Maytag MGR5751BD User Manual Page 6

Comments to this Manuals

Related products and manuals for Cookers Maytag MGR5751BD