Maytag Stacked Washer/Dryer Operations Instructions download pdf (Page 19)

240EswardsStreet,SE

Cbve4and,Tennessee37311

Tel:423-472-3333

Fax:£23-478-8710

Turn on gas supply and open the shutoff at the gas valve. Check all gas connections for leaks

using a soap solution. If bubbles occur, tighten connections and recheck. DO NOT use an

open flame to cheek for gas leaks.

NOTE: As a courtesy, many local gas utilities will inspect a gas appliance installation.

Check with your utility to see if this service is provided in your area.

NOTE: The minimum permissible gas (natural or mixed) supply pressure for purposes in

input adjustment is 4.5 inches of water.

GAS IGNITION

This dryer uses an automatic ignition system to light the main burner when the dryer is

turned on.

If a 4-wire receptacle of NEMA type is used, a matching UL Listed power supply cord (pig-

tail) must be used. This cord contains four No. 10 copper conductors with spade or ring

terminals on the dryer end. The 4th (grounding) conductor must be identified by a green

cover and the neutral conductor by a white cover. The cord should have a suitable strain

relief, and should be a minimum of 4 feet long. The power supply cord and strain relief are

not provided with the dryer.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Maytag Stacked Washer/Dryer Operations Instructions Page 19