Maytag MEDX500BW Use and Care Manual download pdf (Page 7)

USING YOUR DRYER

1. Clean the lint screen

Clean the lint screen before each load. Pull the lint screen out

of its holder. Roll lint off the screen with your ngers. Do not

rinse or wash screen to remove lint. Push the lint screen rmly

back into place.

For additional cleaning information, see “Dryer Care”.

2. Load the dryer

Place laundry in the dryer. Close the door.

Do not tightly pack the dryer; clothes should be able to tumble

freely.

NOTE: Your model may have a different door than the one

shown. Some models have drop down doors.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this dryer.

Before using your dryer, wipe the dryer drum with a damp cloth

to remove dust from storing and shipping.

3. Select the desired cycle

Select the desired cycle for your load. See the Cycle Guide

for more information about each cycle.

SENSOR DRY Cycles

You can select a different dryness level, depending on your

load, by turning the knob to dryness level.

Selecting More Dry, Energy Preferred, or Less Dry

automatically adjusts the dryness level of the fabrics at which

the dryer will shut off.

SENSOR DRY cycles give the best drying in the shortest time.

Drying time varies based on fabric type, load size, and dryness

setting. Choose Energy Preferred for optimal energy savings.

Less Dry removes less moisture and is used for loads you may

want to put on a hanger to complete drying.

More Dry removes more load moisture. Energy Preferred is

used for a starting point for SENSOR DRY cycles.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

Maytag MEDX500BW Use and Care Manual Page 7