Maytag TM-1 User Manual download pdf (Page 5)

4

installation

Reversing Doors

Tools Required: Phillips screwdriver,

5/16" socket and ratchet, putty knife or

5/16" end wrench.

1. Remove the hinge cap and set aside.

2. Remove screws and hinge with a

5/16" socket wrench and set aside.

3. Carefully lift and remove freezer door.

4. Remove screw and hinge arm from

top of the refrigerator door.

5. Carefully lift and remove refrigerator

door.

6. Remove grille cover and set aside.

7. Remove hinge plate from lower cor-

ner of refrigerator and secure it on the

opposite side.

8. Remove the plate from the underside

of the refrigerator door and secure it

on the opposite side.

9. Remove the plate from the underside

of the freezer door and secure it on

the opposite side.

10. Remove the plug buttons from tops of

freezer and refrigerator doors and

replace them on the opposite side.

11. Remove screw hole plugs from top of

cabinet and replace on the opposite

side.

12. Remove washers and stem from the

inside of the hinge plate and place

them on the outside of the hinge

plate.

13. Carefully replace refrigerator door on

the hinge plate in lower corner.

14. Slide the hinge arm into place and

secure with screw.

15. Carefully place freezer door on top of

hinge arm use foam door spacer to

set gap.*

16. Slide top hinge into place on freezer

door and secure screws with 5/16"

wrench.

17. Snap hinge cap securely in place.

18. Replace grille cover.

Remember to plug in your refrigerator

and reset the controls to the appropriate

setting(s).

Removing Doors

(IF NEEDED)

Rest door on a non-scratching surface.

A. Remove left screw.

B. Open door and lift. Rest door on a

non-scratching surface.

Tools

Remove hinge plate assembly. Rest door

on a non-scratching surface.

Do not discard the foam door spacer.

Doors may settle with use.

*

For further assistance, call 1-800-688-9900 U.S.A., 1-800-688-2002 Canada or www.maytag.com

1 2 3 4 5 6 7 8 9 10 ... 47 48

Comments to this Manuals

No comments