Maytag Performa 61005031 User Manual download pdf (Page 3)

Installation

Yournew refrigerator was packed carefully for shipment. Remove and discard shelf packing clips (if used) located just abov,

each shelf where they hook onto the frame. To remove plastic clips wiggle the clips sideways and pull straight out.

Location Leveling

• Allow for a free flow of air through the front base Your refrigerator is equipped with front and back rolle

grille, so it can be moved away from the wall for cleaning. "

enhance its appearance and to maintain performan(

• Install the refrigerator where the room temperature your refrigerator should be level.

will not go below 55° E With temperatures below 55°,

the refrigerator will not run frequently enough to For refrigerator models with adjustable wheels:

maintain proper temperature in the freezer. • Remove the base grille by grasping both ends ar

• Allow a minimum 1/2" clearance on the sides, top pulling straight out (seefig. 1).

and back for ease of installation. If refrigerator is • Adjust the wheels with a screwdriver or a 1/_

placed with the door hinge side against a wall, you socket (see fig. 2).

may want to allow additional space so the door can • To prevent the refrigerator from rolling, use the le

be opened wider, eling/lock screws. Turning down both levelil

• Use caution when installing the unit on vinyl or screws locks the cabinet into place (see fig. 3).

hardwood floors so as not to mark or otherwise • To replace the base grille, align the spring clips wi

damage the flooring. A piece of plywood, a rug or

the round openings in the cabinet and push each el

other material should be used to protect the floor in until the grille locks into place.

while positioning the unit.

For all other models:

• Adjust the leveling/lock screws beneath each frc

corner at the base of the cabinet. Turn these lev,

ing/lock screws clockwise to raise a cabinet corr

and counterclockwise to lower a cabinet corner (s

fig. 3).

• If the floor is not level and it is necessary to raise t

rear of the cabinet, we suggest rolling the rear wheq

onto a piece of plywood or other shim material.

Fig, 1

TURN CLOCKWISE TO

RAISE CABINET CORNER _

COUNTER-CLOCKWISE

TO LOWER CABINET

CORNER

Fig. 2 Fig. 3

1 2 3 4 5 6 7 8 ... 11 12

No comments

Maytag Performa 61005031 User Manual Page 3