Maytag Perfoma MGRH752BDS User's Guide Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
2
Leveling
To enhance appearance and to maintain optimal perfor-
mance, the refrigerator must be level. Your refrigerator
has wheels which can be adjusted for leveling:
Remove the lower hinge covers (see fig. 1). To do this,
grasp each cover near the hinge and apply pressure.
The attachment tabs will snap out, allowing removal
of the covers.
Adjust the wheels with a screwdriver (see fig. 2).
To lock the cabinet in place, turn down both level-
ing/lock feet, located near the front wheels (see fig.
3). Rear leveling/lock feet are not required.
Replace the hinge covers.
If the floor is not level and it is necessary to raise the
rear of the cabinet, we suggest rolling the rear wheels
onto a piece of plywood or other shim material.
Your new refrigerator was packed carefully for shipment. Remove and discard shelf packing clips (if used) located just above
each shelf where they hook onto the frame. To remove plastic clips wiggle the clips sideways and pull straight out.
Installation
Location
Allow for a free flow of air through the front base
grille.
Install the refrigerator where the room temperature
will not go below 55˚ F. With temperatures below 55˚,
the refrigerator will not run frequently enough to
maintain proper temperature in the freezer.
Allow a minimum 1/2” clearance on the sides, top
and back for ease of installation. If refrigerator is
placed with either door hinge side against a wall,
you may want to allow additional space so the door
can be opened wider.
Use caution when installing the unit on vinyl or
hardwood floors so as not to mark or otherwise
damage the flooring. A piece of plywood, a rug or
other material should be used to protect the floor
while positioning the unit.
Fig. 2
Fig. 1
T
O
L
O
W
E
R
C
A
B
I
N
E
T
T
O
R
A
I
S
E
C
A
B
I
N
E
T
Fig. 3
TURN
COUNTER-CLOCKWISE
TO LOWER CABINET
CORNER
TURN CLOCKWISE TO
RAISE CABINET CORNER
Page view 2
1 2 3 4 5 6 7 8 ... 13 14

Comments to this Manuals

No comments