Maytag Perfoma MGRH752BDS User's Guide download pdf (Page 8)

Ice and Water Service

Automatic Ice and Water Dispenser

Dispensing Water and Ice

To dispense ice or water, position a glass against the top

portion of the actuator pad and press. Hold the glass

high in the dispenser opening to avoid spills.

To stop dispensing, release the pressure on the actuator

pad and hold the container in position momentarily to

catch the last pieces of ice or the last drops of water. The

ice delivery door will remain open for a short time.

When it closes, a closing sound can be heard.

To select ice cubes, crushed ice or chilled water, slide

the control to the appropriate setting.

Water from the dispenser is not as cold as ice water. For

colder water, simply add ice before dispensing the

water. The first glass or two of water dispensed each

time may be warmer than subsequent glasses. A full

glass of water will be cooler than a partial glass. To pre-

vent splashing, fill the glass with ice before adding

water.

NOTE: When using the ice dispenser for the first time,

discard the first two or three dozen cubes. When using

the water dispenser for the first time, press the actuator

pad for one to two minutes to bleed the air from the

water line. Discard the first five to six glasses of water

dispensed. This will insure pure and fresh water for

drinking.

Dispenser Light

Your dispenser may have a light switch located on the

right side of the dispenser. Depress the switch to turn

the light on or off.

Lock Switch

Your dispenser may be furnished with a lock switch on

the right side of the dispenser. This push button switch

will turn your ice and water dispensers on or off.

Spill Tray

Do not pour water into the Spill Tray grille at the

bottom of the dispenser area. This is a spill area, NOT a

drain. Normal, small spills will evaporate. Larger spills

should be wiped up with a soft cloth or sponge. The

grille slides out for clean up. Replace the grille by slid-

ing it into the track and pressing on the locking tabs. It

is recommended to clean the spill area occasionally to

prevent mineral deposits.

Ice Dispensing Tips

• Some crushed ice may be dispensed even though

cubed ice was selected. This happens occasionally

when a few cubes are accidentally channeled into the

crusher.

• Likewise, when changing from crushed ice to cubes,

some crushed ice may be dispensed. This may also

happen if irregular sized cubes or ice chips are in the

storage bin.

• If the ice dispenser is not used frequently, ice cubes

may clump together and may need to be broken

apart or discarded.

• A slight pause may be noticed when dispensing

crushed ice. This is normal because the ice is being

channeled to the crusher. Crushed ice pieces will

vary in size and shape.

• Do not add ice to the storage bin which was not pro-

duced by your ice maker, it may not crush and/or

dispense properly.

• Avoid operating the ice dispenser continuously for

more than five minutes. Remove large quantities

from the bin by hand.

• Avoid dispensing ice directly into fine china or deli-

cate crystal. The pressure of pressing against the

actuator pad and the ice dropping into the container

can cause cracking or chipping of delicate items.

DISPENSER

CONTROL

PANEL

ACTUATOR

PAD

SPILL

TRAY

REFRESHMENT CENTER

LIGHT LOCK

CUBE CRUSH WATER

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Maytag Perfoma MGRH752BDS User's Guide Page 8

Comments to this Manuals

Related products and manuals for Fridges Maytag Perfoma MGRH752BDS