Maytag MGR5729 User's Guide download pdf (Page 10)

Surface Cooking (continued)oooooooooooooooooooooooooooooooo

To prevent the cooktop from discoloring or staining:

i Clean c0oktop after eaChus el

Wipe acid or sugar spills ass00 n as the c0oktop !ms

cooled as these spills may disco!or the porce!ain;

Select cooktops are designed

with two contoured wells

with removable porcelain

covered drip pans to con-

tain spills. (See page 16

for cleaning directions.) Drip Pan

? Unhke a range with standard gas burn-

ers, this cooktop does not hft-up nor IS

.... it removable Do not attempt to lift the

"71- ." eooktop for any reason,

...... [ ¢"

Sealed Burners

The sealed burners of your range are secured to the cooktop

and are not designed to be removed. Since the burners are

sealed into the cooktop, boilovers or spills will not seep

underneath the cooktop. However, the burner heads should

be cleaned after each use. (See page 16-17 for cleaning

directions.)

Oil select models the burner head portion of the sealed burner

has a removable cap that is easily removed for cleaning. The

burner will operate effectively with or without the burner cap.

High Performance Burners (12,ooo BTU*)

iiiiiiiiiiiiiiiiiiiiiii

There are one or two high speed burn-

ers on your range, depending upon POWER_h,'_ llllll I

the model. They are located in the left BOOST

Illll

rearand,or,,ghtfrontpos,t,ons.'llllb'llllb

Power boost burners offer higher

speed cooking that can be used to

quickly bring water to a boil and for

large-quantity cooking.

Burner Grates

Tile grates must be prop ....1_ _--__/,_

erly positioned before /_ _ _[.j

cooking, hnproperin- //---_ r7 _--]1

stallation of the grates [_'__..J ___"-,,_1

may result ill chip- __

Grate design may differ slightly

ping of tile cooktop, depending on model.

Do not operate the burners without a pan on the grate.

The grate's porcelain finish may chip without a pan to

absorb the heat from the burner flame.

Although tile burner grates are durable, they will gradually

lose their shine and/or discolor, due to the high temperatures

of the gas flame.

NOTES...

A properly adjusted burner with clean ports will light

within a few seconds. If using natural gas the flame

will be blue with a deeper blue inner cone.

If the burner flame is yellow or is noisy the air/gas

mixture may be incorrect. Contact a service technician

to adjust. (Adjustments are not covered by the war-

ranty.)

With LP gas, some yellow tips on tile flames are

acceptable. This is normal and adjustment is not

necessary.

With some types of gas, you may hear a "l_opping ''

sound when the surface burner is turned off. This is a

normal operating sound of the burner.

If the control knob is turned very quickly from HIGH

to LOW, the flame may go out, particularly if the

burner is cold. If this occurs, turn the knob to the OFF

position, wait several seconds and relight the burner.

Refer to page 20 to adjust tile LOW setting, if needed.

Tile flame should be adjusted so it does not extend

beyond tile edge of tile pan.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments

Maytag MGR5729 User's Guide Page 10

Comments to this Manuals

Related products and manuals for Cookers Maytag MGR5729