Maytag MDG78PN User Manual download pdf (Page 8)

8 Maytag 113255-1

SERVICE MODE

1: MACHINE INFO

2: PROGRAM SETUP

3: DIAGNOSTIC MODE

4: MACHINE SETUP

5: FACTORY SETTINGS

6: DRYER CYCLE

Non-Coin (OPL) Factory Preset Programs/Parameters __________________________

The following are the default cycle descriptions:

Coin Programming Example

Changing “Time for Amount to Start”

Below are instructions explaining how to change the time

allotted for the start price on coin machines for all

temperatures. This is meant to be an example as there are

many options and ways to program this controller. All

programming parameters and options are explained in the

following section “programming selections”.

1. Use the service key to transition the key switch.

Note

Be sure the computer has no credit or time existing

before performing this action.

2. Press the low key once to highlight “Program Setup”

and then press the medium key to select.

3. Press the low key three times to highlight “HI key

settings” and then press the medium key to select.

4. Press the medium button to select “time for amount to

start”.

5. Use the low or high buttons to raise or lower the amount

of minutes shown in the screen to the desired amount

and then press the medium key to save your change.

6. Press the low key once to highlight “time for top off”

then press the medium key to select.

7. Use the low or high buttons to raise or lower the amount

of minutes shown in the screen to the desired amount

and then press the medium key to save your change.

8. Press the pause button once to go back one screen.

9. Press the low button once to highlight “medium key

settings” and press the medium key to select.

10. Repeat items 4 through 8.

11. Press the low button once to highlight “low key settings”

and press the medium to select.

12. Repeat items 4 through 7.

13. Transition the key switch back to the normal position

and remove key.

Programming Selections ____________

MAIN MENU

When PROGRAM Mode is first entered, the control will enter

the PROGRAM Mode main menu. This main menu will

serve as the gateway to all of the PROGRAM Mode features.

The features include: MACHINE INFO, PROGRAM SETUP,

DIAGNOSTIC MODE, MACHINE SETUP, FACTORY

SETTINGS and DRYER CYCLES.

Note

If a fault occurs while in normal operation, and the faults

were not cleared, then these faults will be displayed when

the SERVICE SWITCH has been transitioned. Pressing

the MED/ENTER ( ) key will enable the user to enter

into Service Mode.

Cycle Name

Cycle

Type

Auto /

Manual

Dryness Cool Down (Manual Only) Reversing

Time

Manual

Only

Level

Auto

Only

Temp

100º F - 160º F

38º C - 71º C

Time

2-99 min.

Temp

70º F - 100º F

21º C - 38º C

Mode

Off / On

Spin

120-240 sec.

Stop

5-10 sec.

1 DENIM AUTO

50 DRY 160º F / 71º C 4 100º F / 38º C ON 240 5

2 HEAVY AUTO

50 DRY 155º F / 68º C 4 100º F / 38º C OFF 240 5

3 TOWELS AUTO

40 XDRY 160º F / 71º C 2 100º F / 38º C ON 240 5

4 HAND TOWELS AUTO

40 DRY 155º F / 68º C 2 100º F / 38º C OFF 240 5

5 WHITES AUTO

40 XDRY 155º F / 68º C 2 100º F / 38º C OFF 240 5

6 COLORS AUTO

40 DRY 145º F / 63º C 2 100º F / 38º C ON 240 5

7 SHEETS AUTO

40 DRY 141º F / 61º C 2 100º F / 38º C ON 60 5

8 COTTONS AUTO

40 FIN 140º F / 60º C 2 100º F / 38º C OFF 240 5

9 DELICATES AUTO

40 FIN 130º F / 54º C 2 70º F / 21º C OFF 240 5

10 EXTRA DELICATE AUTO

40 FIN 100º F / 38º C 2 70º F / 21º C OFF 240 5

11 WRINKLE REMOVAL MANUAL 5

DRY 160º F / 71º C 2 70º F / 21º C OFF 240 5

12 TOUCH UP MANUAL 15

DRY 155º F / 68º C 2 100º F / 38º C OFF 240 5

13 CASUAL MANUAL 40

DRY 150º F / 66º C 2 100º F / 38º C OFF 240 5

14 DUVET MANUAL 50

DRY 125º F / 52º C 4 70º F / 21º C ON 120 5

15 HAND WASH MANUAL 20

DRY 125º F / 52º C 4 70º F / 21º C ON 240 5

16 SILK MANUAL 20

DRY 125º F / 52º C 10 70º F / 21º C ON 240 5

17 WOOLENS MANUAL 30

DRY 100º F / 38º C 10 70º F / 21º C ON 240 5

18 AIR MANUAL 0

DRY 100º F / 38º C 20 70º F / 21º C ON 240 5

19 NEW CYCLE 1 MANUAL 99

DRY 160º F / 71º C 2 100º F / 38º C ON 60 5

20 MOP HEADS MANUAL 30

DRY 110º F / 43º C 10 100º F / 38º C OFF 240 5

The LOW/DOWN ARROW ( ) key will enable the user to

scroll through all the menu items.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Maytag MDG78PN User Manual Page 8

Comments to this Manuals

Related products and manuals for Electric laundry dryers Maytag MDG78PN