Maytag MHWE201YW User Manual download pdf (Page 4)

Floor drain system requires a Siphon Break Kit (Part Number

285834), 2 Connector Kits (Part Number 285835), and an

Extension Drain Hose (Part Number 285863) that may be

purchased separately. See “Alternative Parts”. Minimum siphon

break height: 28" (710 mm) from bottom of washer. (Additional

hoses may be needed.)

30"

(762 mm)

28"

(710 mm)

Minimum diameter for a standpipe drain: 2" (51 mm). Minimum

carry-away capacity: 17 gal. (64 L) per minute. A 1/4" (6 mm)

diameter to 1" (25 mm) diameter Standpipe Adapter Kit is

available (Part Number 3363920). Top of standpipe must be

at least 30" (762 mm) high; install no higher than 96" (2.4 m)

from bottom of washer. If you have an overhead sewer and

need to pump higher than 96 inches, a sump pump and

associated hardware are needed. See “Alternative Parts”.

Minimum capacity: 20 gal. (76 L). Top of laundry tub must

be at least 30" (762 mm) above oor; install no higher than

96" (2.4 m) from bottom of washer.

Floor drain system

30"

(762 mm)

/2"

(113 mm)

/2"

(113 mm)

30"

(762 mm)

30"

(762 mm)

DRAIN SYSTEM

Drain system can be installed using a oor drain, wall standpipe,

oor standpipe, or laundry tub. Select method you need.

IMPORTANT: To avoid siphoning, only 4

" (113 mm) of drain

hose should be inside standpipe. Always secure drain hose with

beaded tie strap.

Floor standpipe drain system

(178 mm)

(25 mm)

(102 mm)

(229 mm)

(25 mm)

Custom cabinet installation: Wall standpipe drain system

/2"

(113 mm)

See requirements for oor standpipe drain system.

Laundry tub drain system

1 2 3 4 5 6 7 8 9 ... 19 20

Comments to this Manuals

No comments

Maytag MHWE201YW User Manual Page 4

Comments to this Manuals

Related products and manuals for Sanitary ware Maytag MHWE201YW