Maytag MEDB855DC Instruction Manual

Browse online or download Instruction Manual for Sanitary ware Maytag MEDB855DC. Maytag MEDB855DC Instructions / Assembly User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Inlet Hose Connection Instructions for Steam Dryers
Instrucciones para la conexión de la manguera
de entrada para secadoras con vapor
Instructions de raccordement du tuyau d’arrivée
d’eau pour les sécheuses avec vapeur
TOOLS AND PARTS
Gather the required tools and parts before starting installation. The dryer must be
connected to the cold water faucet using the new inlet hoses. Do not use old hoses.
INSTALLATION REQUIREMENTS
2' (0.6 m) Inlet hose
5' (1.5 m) Inlet HoseRubber washer
Parts needed: (Not supplied with dryer)
Pliers
W10701405A
CONNECT INLET HOSES
1. Turn cold water faucet off and remove washer inlet hose.
2. Remove old rubber washer from inlet hose and replace
with new rubber washer provided. Inspect hoses to be sure
rubber washers are in place.
3. Attach 2' (0.6 m) inlet hose to cold water faucet. Screw on
coupling by hand until it is seated on faucet.
4. Using pliers, tighten the couplings with an additional
two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling can result.
5. Attach “Y” connector to the end of small hose. Screw on
coupling by hand until it is seated on connector.
6.
Attach dryer 5 ft (1.5 m) inlet hose ends to the “Y” connector.
Attach washer cold inlet hose to other side of “Y” connector.
Screw on coupling by hand until it is seated on connector.
Using pliers, tighten the couplings an additional two-thirds turn.
NOTE: Do not overtighten. Damage to the coupling can result.
7.
Using pliers, tighten the couplings an additional two-thirds turn
.
NOTE: Do not overtighten. Damage to the coupling can result.
8. Attach other end of 5' (1.5 m) inlet hose to ll valve at bottom
or top of dryer back panel (depending on model). Screw on
coupling by hand until it is seated on ll valve connector.
9.
Using pliers, tighten the couplings an additional two-thirds turn
.
NOTE: Do not overtighten. Damage to the coupling can result.
10. Check that the water faucets are on.
11. Check for leaks around “Y” connector, faucet, and hoses.
“Y” connector
Parts Supplied:
Your installation may require
additional parts. To order,
please contact the dealer
from whom you purchased
your dryer or an authorized
service company.
Tools needed:
Page view 0
1 2 3 4

Summary of Contents

Page 1 - CONNECT INLET HOSES

Inlet Hose Connection Instructions for Steam DryersInstrucciones para la conexión de la manguera de entrada para secadoras con vaporInstructions de r

Page 2 - REQUISITOS DE INSTALACIÓN

REQUISITOS DE INSTALACIÓN1. Cierre el grifo de agua fría y quite la manguera de entrada a la lavadora.2. Revise si la arandela de goma está en el

Page 3 - EXIGENCES D’INSTALLATION

EXIGENCES D’INSTALLATIONOutils nécessaires :Pièces fournies :RACCORDEMENT DES TUYAUX D’ALIMENTATION1. Arrêter le robinet d’eau froide et retirer le

Page 4 - W10701405A

W10701405A©2014 Whirlpool CorporationAll rights reserved.Todos los derechos reservados. Tous droits réservés.04/14 Printed in U.S.A. Impreso en EE.UU

Comments to this Manuals

No comments