Maytag MDB4621A - 24 in. Dishwasher Operations Instructions download pdf (Page 25)

Attach the panel to the dishwasher

by lining up the bracket tabs with the

slots on the door.

Open the dishwasher door slightly. If

the locking screws on the edge of the

dishwasher door can not be reached,

the dishwasher will have to be pulled

out of its opening a few inches.

Push up one side of the door panel

until it touches the filler strips (or

control panel if filler strips are not

being used) and lightly tighten the

T20 Torx screws on the

corresponding edge of the machine

door. Do not use a power screwdriver

Repeat the process with the other

side of the door panel.

Shut the door.

Check that the door panel is adjusted

correctly. It should be snug at the top

and neatly aligned with the adjacent

cabinetry. If it is not aligned properly,

loosen the Torx screws and readjust

the panel

Once the door panel is positioned

correctly:

^ Open the dishwasher door.

^ Tighten all the Torx screws on the

edges of the dishwasher door.

^ Use the provided caps to plug the

locking screw access holes.

Installation

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

No comments

Maytag MDB4621A - 24 in. Dishwasher Operations Instructions Page 25