Maytag MGR8650FZ Use and Care Manual download pdf (Page 14)

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

www.maytag.com

In Canada, reference the Customer Service section at www.maytag.ca

PROBLEM POSSIBLE CAUSES SOLUTIONS

Nothing will operate Power supply cord is unplugged. Plug into a grounded 3 prong outlet.

Energy Save is active, and the

display is blank.

Press any key on the control to display the time of day. See the

“Electronic Oven Controls” section for more information.

Household fuse is blown or a

circuit breaker is tripped.

Replace the fuse or reset the circuit breaker. If the problem

continues, call an electrician.

Main or regulator gas shutoff

valve is in the off position.

See the Installation Instructions.

The range is improperly

connected to the gas supply.

Contact a trained repair specialist or see Installation

Instructions.

Surface burners will not

operate

The control knob is not set

correctly.

Push in knob before turning to a setting.

Air in the gas lines If this is the first time the surface burners have been used, turn

on any one of the surface burner knobs to release air from the

gas lines.

Clogged burner ports See “Sealed Surface Burners” section.

Surface burner flames are

uneven, yellow and/or noisy

Clogged burner ports See “Sealed Surface Burners” section.

Burner caps positioned

improperly

See “Sealed Surface Burners” section.

Range converted improperly If propane gas is being used, contact a service technician or

see cover for contact information.

Excessive heat around

cookware on cooktop

Cookware and flame are not

matched.

The cookware should be centered above the burner with the

bottom sitting level on the grate. The flame should be adjusted

so that it does not extend up the sides of the pan.

Cooktop cooking results not

what expected

Improper cookware Ideal cookware should have a flat bottom, straight sides and a

well fitting lid, and the material should be of a medium to heavy

thickness.

Control knob set to incorrect heat

level

See “Cooktop Use” section.

Range is not level Level the range. See the Installation Instructions.

Oven will not operate Air in the gas lines If this is the first time the oven has been used, turn on any one

of the surface burner knobs to release air from the gas lines.

Control is locked. Press and hold START for 3 seconds to unlock.

Control is in Demo Mode. Press and hold DELAY START for 10 seconds.

Electronic oven control set

incorrectly

See “Electronic Oven Controls” section.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Comments to this Manuals

No comments

Maytag MGR8650FZ Use and Care Manual Page 14

Comments to this Manuals

Related products and manuals for Cookers Maytag MGR8650FZ