Maytag SS-2 User Manual download pdf (Page 8)

Looking Inside .......................................................

Shelves

Fresh Food Compartment and Door The shelves in this compartment are adjustable so the

interior of the fresh food compartment can be cus-

The fresh food compartment is equipped with tomized for varying food storage needs.

adjustable, Spill-Catcher TM shelves. These shelves have

a spill retainer edge for easy clean up. To remove a shelf:

In some models, these shelves have the slide out feature. • completely unload the shelf

To slide out, simply grasp the front of the shelf and pull. • slightly lift up the rear of the shelf

Gently push in to return the shelf to the original position. • pull the shelf straight out

To lock a shelf into another position:

• tilt up the front edge of the shelf

• insert the hooks into the desired frame openings

• let the shelf settle into place

• be sure the shelf is securely locked at the rear before

reloading

I_k WARNING -- Never to adjust this of shelf when it is loaded with food.

attempt type

Elevator TM Shelf

• Unload the shelf completely,

Certain models feature an Elevator TM shelf as one of the

fresh food compartment shelves. The shelf can be • Slide the shelf forward about two inches and manu-

adjusted up or down while loaded. To adjust this shelf, ally move the two rear latches toward the shell

unfold the recessed crank handle so it is at a right angle center.

to the shelf front. Crank to the right (clockwise) to raise • While supporting the entire shelf and frame fron

the height of the shelf, and to the left (counterclockwise) underneath, lift slightly and rotate the assembl_

to lower the height of the shelf, approximately 30° to allow the rear mechanism tq

clear the vertical rear side rails.

The shelf has the slide out feature that allows easy

access to items stored toward the rear. • The entire assembly can then be moved forward an<

To remove the Elevator ""shelf for occasional cleaning: clear of the refrigerator compartment.

• Completely unload the shelf. • To reinstall, reverse the removal procedure. Be sur_

the shelf is in a level position. When the sliding shel

• Grasp the shelf front and pull forward until it stops, is pushed to the rear, it will reposition the rea

• Press the stops from below (both sides) upward and latches to their correct operating position.

continue pulling the shelf forward, clear of the

frame.

• To reinstall, align the shelf to the frame and push it

all the way back. (There is no need to depress the

stops for reinstallation).

In ordinary use, the Elevator TM shelf with the frame

assembly does NOT require removal. Though unlikely,

and not recommended, the correct removal procedure is

as follows:

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comments to this Manuals

No comments

Maytag SS-2 User Manual Page 8

Comments to this Manuals

Related products and manuals for Fridges Maytag SS-2