Maytag MSD2542VEU00 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
CAREANDCLEANING
CAUTION:
Disconnect the power cord before cleaning. Also, do not touch refrigerated surfaces with wet or damp hands.
Damp objects stick to cold metal surfaces.
Easy Clean Access
Your refrigerator can easily be rolled out for cleaning. Simply unlock the front roller locks. (See page 3.) Pull
cabinet straight out.
Interior
Crispers and refrigerator shelves can be washed in the sink with warm sudsy water. Rinse and dry. (See page 7 for
procedure to remove refrigerator shelves.)
When cleaning a glass cantilever shelf, you can remove it and submerge the entire assembly in warm water. Never
use hot water. Always allow glass to warm up to room temperature before immersing in warm water.
Adjustable door bins and the egg cradle can be washed in warm, sudsy water.
Clean inside of both freezer and refrigerator compartment with a mild detergent and water or baking soda and
water. Use 1 to 2 tablespoons baking soda per quart of water. Rinse and wipe dry. Be sure to wring out excess
water from sponge or cloth when cleaning in the area of controls, lights or electrical parts.
The door gasket can be cleaned using baking soda solution or mild detergent. Rinse and wipe dry.
NOTE:
DO NOT USE abrasive cleansers, concentrated detergents, bleaches, cleaning waxes, solvents or polish
cleaners to clean refrigerator interior.
NOTE:
Before cleaning freezer compartment, unplug refrigerator and allow to warm up.
To remove storage drawers: To replace crisper shelf:
1. Pull out to stop. Reverse procedure for removing crisper shelf.
2. Tilt up drawer front and pull out.
To remove freezer basket:
To replace storage drawers: 1. Pull basket partially out.
1. Align drawer rollers in tracks. 2. Reach to back of basket and pivot metal clips up
2. Lift drawer front and push in. to a horizontal position.
3. Pull basket out.
To remove crisper shelf:
1. Remove crisper drawers. To replace freezer basket:
2. Remove the glass insert next. Reach in from under 1. Align basket with rollers.
side and tilt up. Carefully remove insert. 2. Push back into position.
3. Lift front of crisper shelf and pull out. It may be 3. Pivot metal clips back down to a vertical position.
necessary to remove lower refrigerator shelves so
crisper shelf can be tilted for removal.
Interior Lights
CAUTION: To replace upper refrigerator bulb(s):
Disconnect the power cord before replacing light 1. Unplug refrigerator.
bulb(s). 2. Remove light shield by grasping bottom of shield
Wear gloves as protection against possible at each end and pulling out.
broken glass. 3. Lift up and remove shield.
4. Unscrew bulb and replace with 40 watt appliance
Top refrigerator lights are located behind the full bulb.
width light shield at the top back of the refrigerator 5. Replace light shield by hooking top of shield over
compartment. A lower refrigerator light is located plastic pins and securing bottom of shield by
behind the Meat/Cheese drawer on some models, pushing in on middle edges of shield at both ends.
10
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments