Maytag W10285880A - 8336411962010 Specifications download pdf (Page 9)

S ¸_ _ ..... • _ _ _ _ Do o_....

NOTE: Not all appliance bulbs will fit your beverage center. Be

sure to replace the bulb with one of the same size, shape, and

wattage.

To change the light bulb:

1. Unplug beverage center or disconnect power.

2. Using a Phillips screwdriver, remove the screw located at the

back of the light shield. Pull the light shield back to remove

the tabs from the appliance. Remove the light shield.

A. Light shield

B. Tabs

C. Screw

3. Replace the bulb.

4. Reinstall the light shield by inserting the tabs. Align the holes

and insert the screw. Tighten the screw.

5. Plug in beverage center or reconnect power.

Vacations

If you choose to turn the beverage center off before you leave,

follow these steps.

1. Remove all wine bottles from the beverage center.

2. Unplug the beverage center.

3. Clean the beverage center. See "Cleaning."

4. Tape a rubber or wood block to the top of the door to prop it

open far enough for air to get in. This stops odor and mold

from building up.

Moving

When you are moving your beverage center to a new home,

follow these steps to prepare it for the move.

1. Remove all wine bottles from the beverage center.

2. Unplug the beverage center.

3. Clean, wipe, and dry it thoroughly.

4. Take out all removable parts, wrap them well, and tape them

together so they don't shift and rattle during the move.

5. Tape the doors shut and tape the power cord to the beverage

center.

When you get to your new home, put everything back and refer to

the "Installation Instructions" section for preparation instructions.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Your beverage center will not operate

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

• Has a household fuse blown, or has a circuit breaker

tripped? Replace the fuse or reset the circuit.

• Is the Beverage Center Control turned to the OFF

position? See "Using the Control."

The lights do not work

• Is a light bulb loose in the socket? Unplug beverage center

or disconnect power. Gently remove the bulb and reinsert.

Plug in beverage center or reconnect power.

• Has a light bulb burned out? Replace with an appliance

bulb of the same wattage, size, and shape. See "Changing

the Light Bulb."

• Is the power supply cord unplugged? Plug into a grounded

3 prong outlet.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments

Maytag W10285880A - 8336411962010 Specifications Page 9

Comments to this Manuals

Related products and manuals for Drink coolers Maytag W10285880A - 8336411962010