Maytag W10285880A - 8336411962010 Specifications download pdf (Page 5)

WhenMoving"{ourBeverageCenter:

Yourbeveragecenterisheavy.Whenmovingtheappliance

forcleaningandservice,besuretocoverthefloorwith

cardboardorhardboardtoavoidfloordamage.Alwayspull

theappliancestraightoutwhenmovingit.Donotwiggleor

"walk"theappliancewhentryingtomoveit,asfloor

damagecouldoccur.

Clean Before Using

After you remove all of the packaging materials, clean the inside

of your beverage center before using it. See the cleaning

instructions in "Beverage Center Care."

important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

Front View

_ ................ O

A. Cover C. Bottom hinge

B. Bottom of beverage D. Washer

center cabinet

7. Remove the two screws fastening the door stop spacer and

the door stop to the bottom of the beverage center door.

8. Move the door stop spacer and the door stop to the opposite

side and fasten with the two screws. Completely tighten the

screws.

Bottom View

Tools Needed: Phillips screwdriver

1. Unplug beverage center or disconnect power.

2. Remove the screws from each side of the top of the beverage

center cabinet and set aside.

NOTE: There are seven screws total. Do not discard.

3. Remove the hinge cover and washer and set aside.

Top View

Al •

B C

A. Top of beverage center cabinet

B. Hinge cover

C. Washer

4. Lift the door straight up and off of the bottom hinge.

5. Remove the screws fastening the bottom hinge and cover to

the bottom of the beverage center cabinet. There are five

screws total.

6. Move the bottom hinge and cover each to the opposite side

of the bottom of the beverage center cabinet. Completely

tighten the five screws.

A. Bottom of beverage center door

B. Door stop spacer

C. Door stop

Place the washer onto the bottom hinge, then install the

beverage center door onto the washer and hinge pin.

B ....................._ J

A. Bottom hinge washer

B. Bottom hinge

10. Align the top hinge washer with the hinge hole in the top of

the door. Then, insert the top hinge pin through the washer

and into the hinge hole.

11. Fasten the top hinge cover with three screws and move the

remaining four screws to the opposite side. Completely

tighten the seven screws.

A. Top hinge washer

B. Top hinge

1 2 3 4 5 6 7 8 9 10 ... 31 32

Comments to this Manuals

No comments

Maytag W10285880A - 8336411962010 Specifications Page 5

Comments to this Manuals

Related products and manuals for Drink coolers Maytag W10285880A - 8336411962010