Maytag MER5730AAW User Manual download pdf (Page 17)

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

www.maytag.com

Operation

PROBLEM POSSIBLE CAUSES SOLUTIONS

Nothing will operate Power supply cord is unplugged. Plug into a grounded outlet.

Household fuse is blown, or a

circuit breaker is tripped.

Replace the fuse or reset the circuit breaker. If the problem

continues, call an electrician.

Cooktop will not operate The control knob is set

incorrectly.

Touch the display area on the control panel to select a cooking

surface before selecting a function.

The cooktop control lockout is

set.

See “Control Lock” in the “Cooktop Use” section.

Cooktop is turned off. The Power key was unintentionally touched. Press POWER

again. Reset the cooktop.

Cooktop cooking results not

what expected

Improper cookware being used See “Cookware” section.

Cooktop control set to incorrect

heat level

See “Cooktop Controls” in the “Cooktop Use” section.

Range is not level. Level the range. See the Installation Instructions.

Oven will not operate The electronic oven control was

set incorrectly.

See “Electronic Oven Controls” section.

Delay Start was set. See “Cook Time” section.

The oven control lockout is set. See the control lock keypad feature in the “Feature Guide”

section.

The range is in Demo Mode. Demo Mode will deactivate all heating elements. See “Demo

Mode” in the “Electronic Oven Controls” section.

Oven temperature too high or

too low

Oven temperature calibration

needs adjustment.

See “Oven Temperature Control” in the “Electronic Oven

Controls” section.

Oven indicator lights flash Needs service (oven indicator

lights are flashing).

See “Control Display” in the “Electronic Oven Controls”

section. If the indicator light(s) keeps flashing, call for service.

See cover for contact information.

Oven control displays

messages

Power failure (display shows

flashing time)

Clear the display. On some models, reset the clock, if needed.

See “Clock” keypad feature in the “Feature Guide” section.

Error code (display shows letter

followed by number)

Press the CANCEL keypad to clear the display. See “Control

Display” in the “Electronic Oven Controls” section. If it

reappears, call for service. See cover for contact information.

Cooktop display shows

messages

Improper pan being used

(“replace pan” animation showing

in the display when you place a

saucepan on an induction

surface cooking area)

See “Pan Detection” in the “Cooktop Use” section. Check that

the saucepan is ferromagnetic. Check that the diameter of the

saucepan is large enough. Center the saucepan on the surface

cooking area. Allow the saucepan to cool down in the event

that it has become hot when used. Switch the surface cooking

area off, then on again. If the display still does not light up, turn

power off at the circuit breaker. Wait 20 seconds and turn

power back on.

Long cooking time (performance

boost function display flashing

and switching off)

The Performance boost function operates the surface cooking

area with the most power. During long cooking times, it is

possible that the function will switch the surface cooking area

off to keep the cooktop from overheating. You can continue to

use the cooktop if the display is not flashing.

Error code (display flashing “Er”

and numbers)

If an “Er” and a series of numbers appear in the display panel,

turn power off at the circuit breaker. Turn on again. If problem

continues, call customer service. See the cover for contact

information.

1 ... 16 17 18 19 20

Comments to this Manuals

No comments

Maytag MER5730AAW User Manual Page 17

Comments to this Manuals

Related products and manuals for Cookers Maytag MER5730AAW