Maytag MHWZ600WR User Manual download pdf (Page 9)

Electrical Requirements

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

re, or electrical shock.

WARNING

 A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-

delay fuse or circuit breaker is recommended. It is recommended that a separate circuit

serving only this appliance be provided.

 This washer is equipped with a power supply cord having a 3 prong grounding plug.

 To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong,

grounding-type outlet, grounded in accordance with local codes and ordinances. If a

mating outlet is not available, it is the personal responsibility and obligation of the

customer to have the properly grounded outlet installed by a qualified electrician.

 If codes permit and a separate ground wire is used, it is recommended that a qualified

electrician determine that the ground path is adequate.

 Do not ground to a gas pipe.

 Check with a qualified electrician if you are not sure the washer is properly grounded.

 Do not have a fuse in the neutral or ground circuit.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

No comments

Maytag MHWZ600WR User Manual Page 9