Maytag MMV4203DB Dimension Guide User Manual download pdf

PRODUCT MODEL SERIES PRODUCT DIMENSIONS

MMV4203D MMV5201D

Electrical: A 120-Volt, 60-Hz, AC-only, 15- or 20-amp fused electrical supply

with a fuse or circuit breaker. A time-delay fuse or time-delay circuit

breaker is recommended. It is recommended that a separate circuit serving

only this microwave oven be provided.

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10188238A

7/09

Microwave Hood Combination

₈

⁄⁷

)

(

₂

⁄¹

)

4.9

¹⁵⁄₁₆

(43.0 cm)

⁷⁄₈

(40.4 cm)

VENTING REQUIREMENTS

A 3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm) round vent should

be used.

The total length of the vent system including straight vent, elbow(s),

transitions and wall or roof caps must not exceed the equivalent of 140 ft

(42.7 m) for either type of vent.

For best performance, use no more than three 90° elbows.

To calculate the length of the system you need, add the equivalent length for

each vent piece used in the system. See the following examples:

CABINET OPENING DIMENSIONS

The grounded 3 prong outlet must be inside the upper

cabinet.

*30" (76.2 cm) is typical for 66" (167.6 cm) installation height.

Exact dimensions may vary dependin

on type of ran

e/cooktop

A. 2" x 4" wall stud

B. Grounded 3 prong outlet

66" (167.6 cm) min.

12" (30.5 cm) min.

30" (76.2 cm) typical*

30"

(76.2 cm)

min.

6" (15.2 cm) vent system = 73 ft (22.2 m) total

A B

6 ft (1.8 m)

2 ft

(0.6 m)

A. Two 90° elbows = 20 ft (6.1 m)

B. 1 wall cap = 40 ft (12.2 m)

C. 1 rectangular to round transition

piece = 5 ft (1.5 m)

D. 2 ft (0.6 m) + 6 ft (1.8 m)

straight = 8 ft (2.4 m)

A. Rectangular to round transition piece: 3

" x 10" to 6" = 5 ft

(8.3 x 25.4 cm to 15.2 cm = 1.5 m)

B. Roof cap: 3

" x 10" = 24 ft (8.3 x 25.4 cm = 7.3 m)

C. 90° elbow: 3

" x 10" = 25 ft (8.3 x 25.4 cm = 7.6 m)

D. 90° elbow: 6" = 10 ft (15.2 cm = 3 m)

E. Wall cap: 3

" x 10" = 40 ft (8.3 x 25.4 cm = 12.2 m)

F. 45° elbow: 6" = 5 ft (15.2 cm = 1.5 m)

G. 90° flat elbow: 3

" x 10" = 10 ft (8.3 x 25.4 cm = 3 m)

A B C

D E F G

3 " x 10" (8.3 x 25.4 cm) vent system = 73 ft (22.2 m) total

A. One 3 " x 10" (8.3 x 25.4 cm) 90° elbow = 25 ft (7.6 m)

B. 1 wall cap = 40 ft (12.2 m)

C. 2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 m)

A B

6 ft (1.8 m)

2 ft

(0.6 m)

Rectangular to Round Transition for Roof Venting

NOTE: The minimum 3" (7.6 cm) clearance must exist between

the top of the microwave oven and the rectangular to round

transition piece so that the damper can open freely and fully.

3" (7.6 cm)

A. Roof cap

B. 6" (15.2 cm) min. diameter round vent

C. Elbow (for wall venting only)

D. Wall cap

E. 3

" x 10" to 6" (8.3 x 25.4 cm to 15.2 cm)

rectangular to round transition piece

F. Vent extension piece, at least 3" (7.6 cm) high

Microwave Hood Combination 1

Summary of Contents

Page 1 - Microwave Hood Combination

PRODUCT MODEL SERIES PRODUCT DIMENSIONSMMV4203D MMV5201DElectrical: A 120-Volt, 60-Hz, AC-only, 15- or 20-amp fused electrical supplywith a fuse or ci

Related models: MV4203DQ Dimension Guide | MMV5201DW Dimension Guide |

Comments to this Manuals

No comments

Maytag MMV4203DB Dimension Guide User Manual

Browse online or download User Manual for Microwaves Maytag MMV4203DB Dimension Guide. Maytag MMV4203DB Dimension Guide User Manual

Summary of Contents

Related models: MV4203DQ Dimension Guide | MMV5201DW Dimension Guide |

Comments to this Manuals

Related products and manuals for Microwaves Maytag MMV4203DB Dimension Guide