Maytag 750 User Manual download pdf (Page 19)

Self-Clean Oven

is acid-resistant, not acid-proof. The porcdain finish may

discolor if acidic spills are not wiped up before a sdf-

dean cycle.

- It is normal for parts of the range to become hot during a

self-clean cycle

• To prevent damage to oven door. do not attemp; to open

the door when "Lock" is displayed,

- Avoid touching cooktop, door. window or oven veto area

during a clean cycle,

o Do not use commercial oven cleaners on the oven finish

or around any par[ of the oven. The,,'wiii damage the

finish or parts.

• Do not leave baking/pizza stone in the oven daring

self=clean.

The self-clean cycle uses above-normal cooking temperatures

to automatically clean the oven interior.

It is normal for flare-ups, smoking, or flaming to occur during

cleaning if the oven is heavily soiled. It is better to clean the

oven regularly rather than to wait until there is a heavy build-

up of soil in the oven.

During tile cleaning process, tile kitchen should be weft

ventilated to get rid of normal odors associated with cleaning.

Before Serf-Cleaning

1. Turn off the oven light before cleaning. The light may burn

2. Remove broiler pan, all pans, and oven racks from the

oven. The oven racks will discolor and may not slide easily

after a self-clean cycle if they are not removed.

3. Clean oven frame, door frame, area outside of gasket, and

around the opening in the door gasket with a nonabrasive

cleaner such as Ben Ami * or

detergent and water. The self-

cleaning process does not clean

these areas. They should be

cleaned to prevent soil from baking

on during the clean cycle. (The

gasket is the seal around the oven

door and window.}

4. To prevent damage, do not clean or rub the gasket around

the oven door. The gasket is designed to seal in heat

during the clean cycle.

5. Wipe up excess grease or spillovers from the oven bottom.

This prevents excessive smoking, flare-ups or flaming

during the clean cycle.

6. Wipe up sugary and acidic spillovers such as sweet

potatoes, tomato, or milk-based sauces. Porcelain enamel

Notes:

° Oven temperature must be below 400° F to program a

clean cycle.

, Only one oven can be cleaned at a time°

° Both oven doors lock when either oven is being

cleaned.

To set Self-Clean:

1. Close the oven door. Clean

2. Press the Clean pad.

° "Clean" and "SEt" flash in the display.

If the door is not closed within 25 seconds, the self-

cleaning operation will be canceled and the display will

return to the time of day.

3. Press the More+ or Less- pad.

° "MEd" for medium amount of soil (3 hours}

appears in the display.

If the door is not closed, "door" will appear in

the display. After 45 seconds, three beeps will

sound, the self-cleaning operation will be canceled

and the display will return to the time of day.

4. Press the More+ pad twice for heavy soil (4 hours}.

, "HVy" will be displayed.

Press Less- pad twice for light soil (2 hours}.

, "LITE" will be displayed.

Choosing the soil level of the oven automatically programs

the self-cleaning time. "Lock" flashes in the display.

5. After four seconds, the oven will start cleaning.

, The cleaning time will start counting down in the display.

, "Lock" will appear in the display and will flash until the

doors are locked. "Lock" will then remain lit.

, "Clean" will remain lit in the display.

To Belay a Self-Clean Cycle:

1. Press the Delay pad once for upper

oven and twice for lower oven.

° "dLY" flashes.

° "0:00" flashes in the display.

2. Press the More+ or Less- pad to set the

amount of time you want to delay the cycle.

Delay time can be set from ten minutes (10:00}

to 11 hours, 59 minutes [11:59}. cent.

Brand names for cleaning products are registered trademarks of the respective manufacturers.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 83 84

Comments to this Manuals

No comments

Maytag 750 User Manual Page 19

Comments to this Manuals